Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

syncro grinding into third after changing oil...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

syncro grinding into third after changing oil...

Post by rumpig89 »

in 88 maverick TD42 the synchro is grinding into third on the way up and down through the gears. Has happened significantly more noticeable since changing diff oil recently. i think it was 75/80 (the synforce that was reccommeded by there books) that i put in this time... will lighter or heavier be more likely to help my syncro's out??

cheers
Top
Posts: 511
Joined: Tue Feb 10, 2009 6:09 pm
Location: Melbourne

Post by bigbear »

try some molybond?
Last edited by bigbear on Thu Jan 07, 2010 1:50 am, edited 1 time in total.
yesm.
Top
Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

Post by nabstud »

Castrol VMX 80 is the oil to use in Patrol 5 speeds.

Many have had similar problems, then they replace the oil with the Castrol the grinding stops.
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

nabstud wrote:Castrol VMX 80 is the oil to use in Patrol 5 speeds.

Many have had similar problems, then they replace the oil with the Castrol the grinding stops.

^^ what he said ^^
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest