i had to replace the govenor gasket on my GQ td42 injector pump (rotary type)
anyway i had to remove the fuel increse screw to get the cover back on and i think i may have adjust the screw in doing so
does anyone have a service manual on where is should be set at (the vehicle is not turbocharged!) ?????
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
urgent help, standard fuel setting on td42 injector pump
It needs to be set where it works best for you're engine, there are standards used, but the when the engine gets older and the pump gets older the settings change. Find yourself a good local diesel tuner and get it done by a pro.
To get you going though, wind the fuel down and go for a drive, keep stopping and adjusting fuel up till the power feels right and you're not yet blowing to much soot. I had mine adjusted by a pro on the Sunshine Coast and mine has heaps of go for a standard and will blow a little soot and about 3500 under load.
To get you going though, wind the fuel down and go for a drive, keep stopping and adjusting fuel up till the power feels right and you're not yet blowing to much soot. I had mine adjusted by a pro on the Sunshine Coast and mine has heaps of go for a standard and will blow a little soot and about 3500 under load.
Who is online
Users browsing this forum: No registered users and 1 guest