Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series cruiser tail shafts need advice

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 25
Joined: Thu Dec 17, 2009 9:34 am
Location: melbourne

60 series cruiser tail shafts need advice

Post by rohan9376 »

doing conversion 4 speed to 5 speed box need to change tail shafts that suit the 5speed ,,,the ones i have are lateish round ends and the diffs in the vehicle getting converted are the older square type member informed i will have to change the diff flanges is there a way i can just swap the flange end on the tailshafts knocking the unis out , or are they different unis ,,,really dont want to disturb the diff flanges if i can ....preload on bearing poitential leak etc , havent started pulling them apart to look so doing my homework first ,,,,any help apreciate guys
Top
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

yeah u use the end of the old tail shaft on the diff side and other half of the 5 speed on the gearbox side

all 60 series tailshafts will mate with each other.
Top
Posts: 25
Joined: Thu Dec 17, 2009 9:34 am
Location: melbourne

Post by rohan9376 »

popeyehj60 wrote:yeah u use the end of the old tail shaft on the diff side and other half of the 5 speed on the gearbox side

all 60 series tailshafts will mate with each other.
cheers thanks for help
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests