got given 2 3ph 275 cig machines years ago no idea what is wrong with them.
just got a new shed with 3 ph power so i figure it may be chaeper to make 1 from 2 than buy a new bigger unit(i hope
)any help would be much appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mig welder repairs
Moderators: toaddog, TWISTY, V8Patrol, Moderators
mig welder repairs
any one know who does repairs to mig welders in S/E melb?
got given 2 3ph 275 cig machines years ago no idea what is wrong with them.
just got a new shed with 3 ph power so i figure it may be chaeper to make 1 from 2 than buy a new bigger unit(i hope )
any help would be much appreciated
got given 2 3ph 275 cig machines years ago no idea what is wrong with them.
just got a new shed with 3 ph power so i figure it may be chaeper to make 1 from 2 than buy a new bigger unit(i hope
)any help would be much appreciated
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Weldtronic 42-46 Micro Circuit, Dandenong South 3175.
Telephone (03) 9702 9366
(03) 9702 9566
Facsimile (03) 9702 9766
Mobile 0412 362 467
http://www.weldtronic.com.au/
I've had good service from Kevin Saunders in repairing welding machines in the past.
Regards Andrew.
Telephone (03) 9702 9366
(03) 9702 9566
Facsimile (03) 9702 9766
Mobile 0412 362 467
http://www.weldtronic.com.au/
I've had good service from Kevin Saunders in repairing welding machines in the past.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
went to see these guys today and have to say 
a big reccomendation to any needing their services.......
dropped off the welders at about 9am TODAY
and said no rush i know its close to xmas and all just when you get around to it........
was told we will have a look when we get back from the break
I said no probs ill give you a ring after new year......
get a call at 6pm ish today( same day!!!!!!!)
All done as requested ---- new gun,new reg, full service and all now in excellent working order pick it up when you are ready
and very reasonably priced too
nearly fell off my chair
these guys will definatly get more business from me and anyone who asks
a big reccomendation to any needing their services.......
dropped off the welders at about 9am TODAY
and said no rush i know its close to xmas and all just when you get around to it........
was told we will have a look when we get back from the break
I said no probs ill give you a ring after new year......
get a call at 6pm ish today( same day!!!!!!!)
All done as requested ---- new gun,new reg, full service and all now in excellent working order pick it up when you are ready
and very reasonably priced too
nearly fell off my chair
these guys will definatly get more business from me and anyone who asks
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
I have to agree with all you've said, I've had nothing but great service from Kevin and when you compare him to a couple of nuff nuff brothers that are supposedly the "gurus" in welding machine repairs he is it and a bit as far as I'm concerned.
These 2 brothers that I won't name ended up giving me a bill for $1200+ and the machine still wasn't fixed (intermittent problem). Kevin came in, pulled the machine down to check it out and found an "obvious" shorting out problem on the machine chassis and bent the component away so it couldn't short and it was fixed.
They also have the largest range of welding consumables I've ever seen, I'm like a kid in a candy shop every time I go there.
Regards Andrew.
These 2 brothers that I won't name ended up giving me a bill for $1200+ and the machine still wasn't fixed (intermittent problem). Kevin came in, pulled the machine down to check it out and found an "obvious" shorting out problem on the machine chassis and bent the component away so it couldn't short and it was fixed.
They also have the largest range of welding consumables I've ever seen, I'm like a kid in a candy shop every time I go there.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Who is online
Users browsing this forum: No registered users and 4 guests