Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

td42 engine flat spot

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 8
Joined: Wed Jul 29, 2009 10:38 am
Location: NSW

td42 engine flat spot

Post by CrazyRay42 »

has anyone else had any dramas with a flat spot on a td42 in gq non turbo, standard, just recently its been a bit down on power just struggling all the time and when under full throttle say 2nd gear rev from 1000 to 4000 at about 3200 sort of skips a beat or two then carries on, other times its normal and perky. It takes about 4.5second to rev from 1000 to 4000 in second gear and getting about 600km per tank, 33in tyres standard gearing. One day it go up mout vic pass easy in third around 3000, other days is back to second with same load and tyres, just sort of feels like retarded ingnition timing on my old petrol
cheers
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

probably fuel blockage at pump. pull off top where fuel inlet is and clean filter.

to easy
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
User avatar
DEZ
Posts: 205
Joined: Sun Apr 01, 2007 8:45 pm
Location: sydney

Post by DEZ »

gday

i think my situation was simular but little different.. the more you rev it the more it didnt want to keep going up the rev range (3k plus). Anyway i looked for the filter from other posts and nothing in there (worth checking), i fitted an electric lift pump. Now it revs right through... big improvment, still blows no smoke at all :D oh well
95 GQ td42
3"lift 33 claws
covered in mud
Posts: 345
Joined: Mon Aug 04, 2008 8:48 am

Post by chpd80 »

I thought the TD42 had a flat spot from the factory from 800rpm to 4500rpm. :D :D :P :P :D :D
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

DEZ wrote:gday

i think my situation was simular but little different.. the more you rev it the more it didnt want to keep going up the rev range (3k plus). Anyway i looked for the filter from other posts and nothing in there (worth checking), i fitted an electric lift pump. Now it revs right through... big improvment, still blows no smoke at all :D oh well
think it would be this. chuck a low pressure (think mines a ~2-7psi - cant recall the brand but can check if needed) lift pump inline back near your tank. Prob just means the injector pump is starting to get bit tired. heaps of life with a lift pump tho...
Posts: 8
Joined: Wed Jul 29, 2009 10:38 am
Location: NSW

Post by CrazyRay42 »

cheers all for the info will check filter basket, and look into lift pump. LOL to chpd80 reply, all have good xmas, will let know what i find
Posts: 212
Joined: Tue Apr 17, 2007 2:16 pm
Location: mildura vic

Post by outback_pootrol »

i had the similar problem on my old na troll, it would get to about 1800 then popp like a bad timed petty all the way to whatever i took it to.
turned out to be sh1t fuel from caltex, filled her back up with mobil and went great
Posts: 8
Joined: Wed Jul 29, 2009 10:38 am
Location: NSW

Post by CrazyRay42 »

had a look there is no filter at banjo bolt for inlet there is a small basket filter for the drain back, cleaned that one, was clogged a bit but havent driven yet, the pump was re coed last year along with injectors has a ll new rubber hoses from tank to pump and back new main filter
Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests