Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

toughdog rtc

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 11
Joined: Mon Dec 14, 2009 5:27 pm
Location: ashburton nz

toughdog rtc

Post by firestonecruiser »

hi all received one of these from the good lady at xmas and was just wondering what way they go in. it is for a 80 series. if anyone has pics of theres they can put up and give me an idea of how they fit would be great.

cheers jono
Top
Posts: 160
Joined: Tue Dec 22, 2009 4:41 pm
Location: ...

Post by tufflux88 »

doesnt really matter a great deal which way they go in it'll still work
Top
Posts: 11
Joined: Mon Dec 14, 2009 5:27 pm
Location: ashburton nz

toughdog rtc

Post by firestonecruiser »

cheers man put it in today n seems to go ok
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Put on like a shock
I have a landcruiser one end is higher than the other
Also reading the instructions and looking at the old one works as well
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

the one i had for an 80 series 4 inch lift (apparently different for different lifts) only went in one way. it was pin-eye, and the pin end went into a custom bracket that bolted to the chassis.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests