Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

modifying bullbar for winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 116
Joined: Thu Jul 06, 2006 10:31 am
Location: victoria, beechworth

modifying bullbar for winch

Post by tuff4runner »

was just wondering how hard is it to change a non winch bar for an 80 series in to a himount compatable bar? cheers anthony
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Steel bar ?
Angle grinder and a drill
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 116
Joined: Thu Jul 06, 2006 10:31 am
Location: victoria, beechworth

Post by tuff4runner »

yeah a steel bar!!! lol cheers has anyone done it?
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

I did it on my GQ mate with just a standard steel bar i cut the top off the centre of the bar and welded a winch cradle inside the steel bar that i made from 6mm plate it was on the car for 2 years with allot of hard winching and was perfect never had a problem with it

Image

Image

Image
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 98 guests