Hi guys, I just purchased a GQ diesel, and was giving the old girl a once over when i found a hose going to nowhere.
It is attached to an electrical device on the firewall in turn connected to the clutch master. Is the hose supposed to be connected to anything ???
Looks like a vaccum hose but im not familiar with the TD42 engine.
Any help is greatly appreciated.
Shano
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Help needed with my GQ
sounds very much like the idle up supply line,
nastytroll, did you give the line a clean out, mine had done the same thing when i got it (just dangling down, i thought it was a drain line until i saw it in my manual one day) i plugged it in, it did nothing, so i took it off gave it a flush out, refitted it and it works like a dream.
nastytroll, did you give the line a clean out, mine had done the same thing when i got it (just dangling down, i thought it was a drain line until i saw it in my manual one day) i plugged it in, it did nothing, so i took it off gave it a flush out, refitted it and it works like a dream.
Who is online
Users browsing this forum: No registered users and 0 guests