Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front axle specifications, 60 series and 80 series........

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Front axle specifications, 60 series and 80 series........

Post by flyology »

Can anyone tell me is there is a difference in spline and diameter on either end between 60 and 80 series axles? I realize there is a difference in length, just wondering if you can put and 80 series axle into a 60 series diff centre.....
My 60 series rebuild....
http://www.outerlimits4x4.com/ftopic103004.php&highlight=

http://www.flyology.com

2006 CRV Sport (wifes car)
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Pretty sure you can, but a 60 diff wont fit into an 80 front housing.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: Front axle specifications, 60 series and 80 series......

Post by bad_religion_au »

flyology wrote:Can anyone tell me is there is a difference in spline and diameter on either end between 60 and 80 series axles? I realize there is a difference in length, just wondering if you can put and 80 series axle into a 60 series diff centre.....
you can.
Spit my last breath
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

80 series rear diff is the same as a 60 series rear diff but different ratio

80 series 4.11
60 series 4.1
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Hamo wrote:80 series rear diff is the same as a 60 series rear diff but different ratio

80 series 4.11
60 series 4.1
FAIL.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

vk7ybi wrote:
Hamo wrote:80 series rear diff is the same as a 60 series rear diff but different ratio

80 series 4.11
60 series 4.1
FAIL.
:lol:

Actually that SFA tech is a FAIL. :roll:
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests