Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Glowplug Light 12HT
Moderators: toaddog, Elmo, DUDELUX
Glowplug Light 12HT
My glow plug light does not come on when the ignition switch is turned on. I've checked the globe and its fine, so are the fuses. I've been waiting for 15sec before I turn the engine on and it seems to start fine but the light should come on. Any ideas where I should be looking to track down the fault? Beyond looking for a short?
Just turn the key and start it, don't give it time to glow, if it starts the same, theres something wrong with the glowplug relay or wiring.
Switch the car to on and multimeter the glowplug power rail, don't know the voltage and/or time limit on the glow relay, you might have to get someone else to turn the key to on, if its getting voltage its just the bulb wire.
If theres no power, check the glow plug relay wiring, bridge a wire from the battery to the switch wire on the relay, there will be 2 big wires, and a smaller switch wire, thats the wire that you want to power, if it clicks the switch wire is your problem, possibly a earth might be in the loom or it might earth through the housing.
My 3l wil start perfectly without glowing the plugs at all, either or you won't need to glow it for 15 seconds as the relay will turn the plugs off automatically before that.
Found this comment don't know about the 12ht but the same will still apply
The 12H-T doesn't have glow plugs, it's more like a chamber that pre heats the fuel.
Switch the car to on and multimeter the glowplug power rail, don't know the voltage and/or time limit on the glow relay, you might have to get someone else to turn the key to on, if its getting voltage its just the bulb wire.
If theres no power, check the glow plug relay wiring, bridge a wire from the battery to the switch wire on the relay, there will be 2 big wires, and a smaller switch wire, thats the wire that you want to power, if it clicks the switch wire is your problem, possibly a earth might be in the loom or it might earth through the housing.
My 3l wil start perfectly without glowing the plugs at all, either or you won't need to glow it for 15 seconds as the relay will turn the plugs off automatically before that.
Found this comment don't know about the 12ht but the same will still apply
The 12H-T doesn't have glow plugs, it's more like a chamber that pre heats the fuel.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Could be the same cluster as different models, 1hz etc,some hilux clusters are the same they have lights that never work for use with different motors,options etc.
Yes i realised that this morning after doing a bit more reading.
So then the glow light has never worked.
Yes i realised that this morning after doing a bit more reading.
So then the glow light has never worked.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
It is true that the 12HT is direct injection and does not require as much assistance to start as an indirect injection engine.
No, the 12HT does not have glow plugs but it still has a pre heating system. This system is located just above the inlet plenum and looks sort of like the grill out of your oven.
You might not be seeing the light come on, because the pre heating system only activates when your water temperature is very low. The system will only activate when your engines water temperature gets down to 2 degrees celcius. Even then, it will only be on for 2 seconds.
Here is a picture of the intake pre heating system from my 12HT.
In this one, you can see how it is sandwiched between the intake shutter assembly and the inlet plenum.
[/img]
No, the 12HT does not have glow plugs but it still has a pre heating system. This system is located just above the inlet plenum and looks sort of like the grill out of your oven.
You might not be seeing the light come on, because the pre heating system only activates when your water temperature is very low. The system will only activate when your engines water temperature gets down to 2 degrees celcius. Even then, it will only be on for 2 seconds.
Here is a picture of the intake pre heating system from my 12HT.
In this one, you can see how it is sandwiched between the intake shutter assembly and the inlet plenum.
[/img]
Who is online
Users browsing this forum: No registered users and 52 guests