Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MITS> 3L. V6 Waterpump Help??

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 25
Joined: Thu Sep 24, 2009 10:30 pm
Location: adelaide

MITS> 3L. V6 Waterpump Help??

Post by daweclan »

Do you really have to take the front of the motor off to rerplace O ring on waterpipe! ??????????????? :armsup:
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Yes. Do the pump while you're there. You can just buy the pump section or the complete pump with housing.
Posts: 25
Joined: Thu Sep 24, 2009 10:30 pm
Location: adelaide

Post by daweclan »

Thanks hudson,It's in my wifes verada?magna. It looks like i have to remoove the engine mount aswell,All for the waterpump!!! :x :x Spose it would pay to do the whole pump Genuine and timing belt ?????? :bad-words:
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Timing belt kit (seals tensioner etc) depending on k's. Should be done every 100k. Pump and kit can be sourced aftermarket. If you are only going to do the pump, as apposed to the whole housing, you will need to get the o'ring from Mits.
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Post by date »

I have done the water pump on my wife's Magna and also my NL Pajero. I did both about 1 month ago, and the easiest to work on was the Magna.

Assuming it is the TE or TF magna (engine on the R side of the car), you have to jack up the car, remove the R wheel, support the engine on a stand and remove the R engine mount. It isn't particularly easy, but it can be done at home. It took me about 6 hrs from go to whoa to do the water pump, the crankshaft oil seal and the timing belt. The Gregory's manual for the magna goves a pretty good description of the job.

Enjoy! - I have done both cars twice now (both are 200000 km) and have about another 5 years before the next timing belt change is due.
Posts: 25
Joined: Thu Sep 24, 2009 10:30 pm
Location: adelaide

Post by daweclan »

Thanks heaps for ya help fela's. Ill'e go out and look at it scratching my head tmmrow :cry: :?
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests