Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Zook G16B engine price?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Zook G16B engine price?

Post by Goatse.AJ »

OK, a question....

How much could I expect to fetch for a no-longer working G16B?

I've had to bite the bullet and source a replacement motor for the Vitara. Found out yesterday my old head is cracked, so managed to get hold of a G16A for a real good price...just don't have the time or money to waste on
continuing with the fix on the old one.

I've been offered what I think is a decent price for the old one as is (still pulled down), but just wanna make sure neither of us is gettin' dudded in the deal.

Just another quick question...or 2... what's the difference between the A and B donks? ...and could I just hook up my G16B computer to the existing EFI on the G16A ???
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

i thought the G16A was the carburated and the G16B was the EFI. :?
not sure though.
Mark.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Zook G16B engine price?

Post by Guy »

AJFeroza wrote:OK, a question....

How much could I expect to fetch for a no-longer working G16B?

I've had to bite the bullet and source a replacement motor for the Vitara. Found out yesterday my old head is cracked, so managed to get hold of a G16A for a real good price...just don't have the time or money to waste on
continuing with the fix on the old one.

I've been offered what I think is a decent price for the old one as is (still pulled down), but just wanna make sure neither of us is gettin' dudded in the deal.

Just another quick question...or 2... what's the difference between the A and B donks? ...and could I just hook up my G16B computer to the existing EFI on the G16A ???


well ... a 1.3 head will work on a 1.6 block .. AFIK the 16a and B a very similar and the comp will work just fine .. .

have no idea what a short block in pieces is worth .. a coupla hundred perhaps ( all I would pay for it )
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I just bought a complete untested Carbed 1600 for $200 from a wrecker. It came out of a vit that had an interior fire that also came through the firwall and slightly burnt the dizzy and melted the Airfilter. From inspections so far it appears to be purfect. Should know in a few weeks when we fit it to a mates sierra.
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

Yeah, I always thought the A was carby and B EFI, but it seems it isn't the case...
all I've been able to find out is that there were some internal changes made somewhere along the way...??

Anyway, thanks for the info...prolly the fella that wants mine will mate it up to a 1300 head, I spose.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

my missis has a swift with a 1.6 16v carby motor in it apparently they only came out in the sedans
P.E.T.A
People eating tasty animals.
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

G16A = 8 valve, G16B = 16 valve
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

cj wrote:G16A = 8 valve, G16B = 16 valve


Must be different to the g13 motors .. I had a g13ba .. (It had no idea what it was supposed to be .. :armsup: )
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

The difference between an A & B motor is the letter stamped after G16
Pistons and conrods between the two are interchangable.
A heads bolt onto B blocks etc.
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

I still haven't been able to work out the difference between the 2, other than that the A has "G16A" stamped on the block, and that the writing on the inlet manifold says "Electronic PETROL injection" instead of "Electronic FUEL Injection"...My G16A is definitely a 16 valve...apparently the A ran in production until abt 1994, the B for a bit longer.... :armsup: :armsup: :?
bru21 wrote:What happens in goat, stays in goat!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest