Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Getting longer break lines... Where from??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 41
Joined: Mon Oct 26, 2009 10:38 am
Location: WOLLONGONG

Getting longer break lines... Where from??

Post by shane1992 »

Hey everyone

Where abouts do you get longer break lines for a 91 Suzuki Viatara swb ??

Regards
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

probably your local brake shop :D. take your lines in that you wnat lengthened and they can make up some news ones in your specified length. Going rate in melb is anywhere between $40-$60 bucks a line.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 41
Joined: Mon Oct 26, 2009 10:38 am
Location: WOLLONGONG

Post by shane1992 »

Cool, does anyone know if every break line needs to be replaced with a longer one with a 2 inch bodylift and 3 inch suspension lift?
Top
Posts: 115
Joined: Tue Sep 30, 2008 10:55 am
Location: Beaudesert

Post by P@nda »

Mate, steer away from brake shops.
Try and find someone that does all types of hoses
and that kind of stuff.

My brake shop quoted me $75 for a break hose
4" longer than original.

The shop I went to (High Performance Fluid Connections)
charged me $25 to do the exact same thing.
96 Coily, 100mm lift, Jimny Front Diff, 4.09 diff gears, Reduction gears, 30" Trepadors, 6 Point Rollcage, Custom Bash Plates, Open diffs to give the big guys a run for their money!!
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

You probably will need all three replaced, (There's only one in the rear) From memory, the front of vitaras have a retaining clip 1/2 way along that clips the line to the strut. Make sure this is crimped in in the right place.

X2 for going to a hose specialist rather than a brake shop.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 37
Joined: Fri Jun 06, 2008 10:47 pm
Location: Sydney

Post by fe11xx »

You're also going to have to make sure the lines have the little ADR plastic sleeve if they're custom..
Top
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

I always use enzed, try them, if not you could try pirtek.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 51 guests