Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Diesel, Tacho not working???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
T.B
Posts: 21
Joined: Tue Nov 09, 2004 9:29 pm
Location: Maitland

GQ Diesel, Tacho not working???

Post by T.B »

I have tried a search but had no luck. Does anyone have any ides as to why the tacho would stop working, & where to start looking for the problem. Thanks....
Pick the line and DRIVE IT !
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Re: GQ Diesel, Tacho not working???

Post by money_killer »

T.B wrote:I have tried a search but had no luck. Does anyone have any ides as to why the tacho would stop working, & where to start looking for the problem. Thanks....
i have the same problem on my bro's car ......
94 Patrol Petrol 3.0L lift, tyres, winch
90 WT Serria locked diff, Muddies
Posts: 206
Joined: Fri Feb 13, 2009 10:08 am
Location: Melbourne

Post by PBBIZ2 »

You need to supply more info like year, motor size.
If its a 2.8Turbo 'could' be a problem in the control board that does the glow plug timing, as they are linked - had this problem after drowning mine - was a replacement unit - 2K from memory - but then could be something else.
T.B
Posts: 21
Joined: Tue Nov 09, 2004 9:29 pm
Location: Maitland

Post by T.B »

Sorry guys, it's a 1989, 4.2L Diesel. The motor has just been replaced, & the tach is now not working.
Pick the line and DRIVE IT !
Posts: 568
Joined: Fri Nov 01, 2002 10:11 pm
Location: cranebrook, NSW

Post by Ryan »

have a look on the front of ur motor, on the timing cover on the passenger side up towards the top.. theres a small plate, with 2 12mm bolts holding it on and a wire comin out - thats ur tacho sender, make sure its plugged in may have been overlooked when the new motor went in

might be right might not be but its a start
Posts: 79
Joined: Wed Jun 29, 2005 2:12 pm
Location: Townsville.

Post by Feenz »

yeah weird shit, my one stopped working and I went up an overpass link road that swept to the left, it started flickering, and i reefed a bit on the wheel and it has been working since. Id say it would be a poltigiest or something....logical
T.B
Posts: 21
Joined: Tue Nov 09, 2004 9:29 pm
Location: Maitland

Post by T.B »

Ryan, thanks I will check it out.
Pick the line and DRIVE IT !
Post Reply

Who is online

Users browsing this forum: No registered users and 154 guests