Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Air tank pressure

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 31
Joined: Wed Jan 12, 2005 1:09 pm
Location: Rock

Air tank pressure

Post by Austravel »

Hi,

What tank pressure is usually used in trucks? I have an approx 10 litre truck air tank but no rating on it, second hand so no idea of age. It's welded (longitudinally) so not seamless which will de-rate it. I can make some assumptions but am trying to get a better idea. I've no idea what range of air pressures are, or have been used in trucks.
Top
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

Mine has a pressure switch which automatically cuts out at 150 psi.
Top
Posts: 31
Joined: Wed Jan 12, 2005 1:09 pm
Location: Rock

Post by Austravel »

Thanks for that.
Top
Posts: 15
Joined: Sun Sep 06, 2009 6:38 pm
Location: Melton near the south pole

Post by raafy »

Most trucks run pressures between 8 & 12 bar so the tanks are fairly capable. In my 40 years working on heavy vehicles I have not known of a tank failing unless they were rusted through.
I have just "acquired" 2 tanks from a Volvo bus & will be fitting one as soon as I get my compressor built.
Top
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay

Post by mrw82 »

can probably get away with 150psi. but you shouldn't need to go any more than 100psi. you should have a pressure switch on your compressor (off at 100, on at 70) you should also have a pressure relief valve in the tank, all pressure vessels should have one. If your pressure switch is set for off at 100psi then you'd set your pressure relief valve to between 110-120 psi.
Top
Posts: 31
Joined: Wed Jan 12, 2005 1:09 pm
Location: Rock

Post by Austravel »

This all helps thanks everyone.
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

A fantastic example of why you need pressure relief valves

http://www.youtube.com/watch?v=pu3FwgIHsQA

Applying to steam, I know, but gives you a bit of an idea about how a pressure vessel disintegrates.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Make sure it's not a vacuum tank... They wont handle pressure.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 31 guests