60 series 75 series diff housing's?

[84sloth]

i am in need of a rear housing for my 75 ute. i can geta 60 series with front n rear lockers cheap. am i able to use the rear housing out of the 60 series and put straight into my 94 hzj75? any help would be appreciated

[RAY185]

60 series housings are about 3" wider than 75s. You could fit both housings under the 75 but you'd have to move the spring perches to line up with your spring hangers.

[TheBigBoy]

Its less than that... I put a 60 series front (leaf spring) diff in my old 75 series. Had to swing the leaves out about 20mm each side. Made no diffence at all. But I had the BIG diff centre in the front. They will bolt straight in.

[dogbreath_48]

Its less than that... I put a 60 series front (leaf spring) diff in my old 75 series. Had to swing the leaves out about 20mm each side. Made no diffence at all. But I had the BIG diff centre in the front. They will bolt straight in.

How worn were your spring/shackle bushes?

[TheBigBoy]

Not warn at all. Had them in there for 3 years

[land8079]

i am in need of a rear housing for my 75 ute. i can geta 60 series with front n rear lockers cheap. am i able to use the rear housing out of the 60 series and put straight into my 94 hzj75? any help would be appreciated

I got a housing out of a 75 its your for $50 bucks if ya want it.
P.M. me

[Ice]

you also have rear discs the 60 wont

bolt up ?

[666mademedoit]

ive just put an 80 series diff under the back of my 75... bit of mucking around with the handbrake cable and running new brake lines but well worth the effort!!!! by the time you convert that cheap 60 series diff to discs its no longer going to be so cheap...

[84sloth]

yes 80 series could be done but its coil. i need the leafs for work so i can carry weight. i had a chassis to convert my 75 but couldnt due to work pretty sh!t are 60 centres the same as 75? i know early 80 series fit my 75 i wanna put a rear locker in it. i was looking at the 60 diffs with lockers in them but since the 60 is a bit wider and has a bit of sh!t involved i think ill just look for centres or locker seperately.

[666mademedoit]

i removed all the coil gear from the housing and welded leaf spring perches on, superier engineering does the spring perches. send me a PM with your email address and I'll email you some pics

[hulsty]

I have a pair of perches here from superior I dont need anymore if you go a 60 or 80 diff

[Z()LTAN]

dont try and put the front 80s housing under a 75 as leaf sprung... its almost impossible.

[hulsty]

almost but not quite, is it due to the diff offset? Ive seen a 45 series with 100 series diffs under it and leafs. Didnt see how they tackled it around the diff though

[vk7ybi]

by the time you convert that cheap 60 series diff to discs its no longer going to be so cheap...

How do you get discs on a 60 rear axle?

[666mademedoit]

pretty sure marks adapters and Locktup do kits for discs on a 60 diff.... as for a 80 diff in the front of a 75 it can be done but is a fair amount mucking around to cut the drivers side spring perch into the diff pumkin... For once I agree with ZOLTON

[vk7ybi]

I'm not seeing kits listed..

[crazy eyes]

the easyest way to convert 60 drum to disk is cut the ends of the diff housing and have the ends from the 75 housing welded in.
that is how i did myne and I have no problems .it cost me about $300 to do the conversion you allso have to change the spring perches as the 60 ones are wider appart and are allso different to the 75 ones.
I have done the same sort of thing to the front it gave me a 75 mm wider track witch is more stable on side angles and cornering
cheers crazy eyes

[vk7ybi]

So the question needs to be asked then, if one cuts the housing in a similar fashion to a cut and turn front knuckle cut, then removes the spindles, does the same to the 75 donor axle, will he be able to press the 75 stubs into the 60 housing? Are the machined diameters on the stub the same between models?

[crazy eyes]

well the machine shop that did mine said it was very straight forward and had no drama .

[84sloth]

almost but not quite, is it due to the diff offset? Ive seen a 45 series with 100 series diffs under it and leafs. Didnt see how they tackled it around the diff though

thanks hulsty but ill go with the 75 housing it will be much easier. also is a 60 centre the same as 75 series?

[RAY185]

almost but not quite, is it due to the diff offset? Ive seen a 45 series with 100 series diffs under it and leafs. Didnt see how they tackled it around the diff though

thanks hulsty but ill go with the 75 housing it will be much easier. also is a 60 centre the same as 75 series?

Yes, but check the tailshaft flange, there were some bolt pattern changes between models/years.

[84sloth]

thats ok i have a spare flange out of a centre ive got hopefully there the same spline. just have to find a 75 housing. land8079 ive tried messaging you 3 time but it wont work the msg's wont send for some reason so if u read this pm me your mobile number and ill call u asap cheers for all the help fella's