Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6g72 timing belt

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 26
Joined: Thu Oct 15, 2009 11:12 am
Location: cessnock

6g72 timing belt

Post by poojero »

Broke the timing belt on my 6g72 powered series 1 today. Just wondering if anyone has knowledge if this would generally bend valves and hurt pistons in one of these motors?
Have been told that 6g72's have enough clearance between valves and pistons for this to not be a problem. Is this true or should i just find another engine for it?
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I believe the 6G72 is a "free spinner", so you should be OK.

Did it make horrible noises when it went?
Top
Posts: 26
Joined: Thu Oct 15, 2009 11:12 am
Location: cessnock

Post by poojero »

Didn't hear any noises when it went.
But i was at about 5500 rpm so i couldn't hear a lot apart from exhaust noise.
Top
Posts: 27
Joined: Thu Jan 25, 2007 2:23 pm
Location: Columbia, SC USA

Post by FrankR »

6G72 SOHC 12v with 8.9:1 CR is non-interference. 6G72 SOHC 12v with 10:1 CR and all DOHC and/or 24v variants are interference design.

Frank
'89 G-Raider Supercharged 3.0L V6, MegaSquirt 2, lockup A/T, 2.5" exhaust, Cibie H4s/Oscar SCs, Hella Micro DE fogs, S/W hubs, Bilsteins, 165A alt., Aussie Locker front/LSD rear
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest