anyone done a ls1 into a 75series

[180OZT]

hey wounderin if anyone has done a ls1 or gen 3 in to a 75series landcruiser,

if so who does a kit
any drama's
any pictures ??

thanks

[crankycruiser]

be much the same as an 80 series.. pretty easy to do really..

marks 4x4 do a kit.

[hiluxmad]

marks do a kit for this but they dont fit them(the kits) anymore but im sure there will be someone round your area that will do the job if you dont ant to.

[180OZT]

anyone got pics or more details

[BFCK97]

my brother did the conversion so i will direct him into here and he will be able to help you with any questions you have.
here is a link to his page on here.
the cruiser is in new south wales somewhere last i heard.
maybe around woolongong.

http://www.outerlimits4x4.com/ftopic146740-0-0-asc-.php

[VKYOOT]

180OZT


i used conversion gear to suit chev/holden turbo pattern.

i went to a clutch shop and got a pressure plate to suit the ls1 and a 12" clutch plate with 10 spline holden centre to suit the input shaft extension.

wiring i got from Killas kustom kables in QLD his on here "killalux"

fuel i had a vn v8 fuel pump from a surge tank fed by a lift pump.

used the stock hj75 radiator and the hoses were on the correct side which worked well. it had a 16"thermo on it, worked well.

any other q's PM me

[thrashlux]

you would want to put the gearbox out of an 80 series in it H15x with part time transfer then u can use the 80 series ls1 bell housing and no pop boxes all the time
then be stuck buying weak boxes to fit to your adapter set up

[180OZT]

thanks for the help