Hi Forum,
I have looked around the 'net and cant find an answer .....
Will a 6GG75 bottom end, with a 6G72 top end match up? and will the 6G75 bolt up to a Gen. 1 Pajero?. The idea is to build more of a smooth reliable torquer and keep the earlier injection to keep things simple in matching the Gen. 1.
Thoughts, dont flame .....
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
6GG75 bottom end, with a 6G72 top end. Is it possible?
Moderator: -Scott-
6GG75 bottom end, with a 6G72 top end. Is it possible?
'96 Discovery SE - Stock - 215/85R16
Hi There,
Had my NH 3.0l V6 rebuilt, now using 6g75 pistons, stroked the crank as well, now a 3.8l. So yes it is possible. Have to use an aftermarket piggyback CPU though. Dyno tune gave me 140kw, 260Nm @ 4000, ( very flat curve 254 @ 3000 and 240 @ 2000) but the engine is still very tight. Should get more.
Had my NH 3.0l V6 rebuilt, now using 6g75 pistons, stroked the crank as well, now a 3.8l. So yes it is possible. Have to use an aftermarket piggyback CPU though. Dyno tune gave me 140kw, 260Nm @ 4000, ( very flat curve 254 @ 3000 and 240 @ 2000) but the engine is still very tight. Should get more.
Hi, I used the block from the 3.5 Magna with my Pajero heads. Its a tough job but all do-able. You end up with so much bottom end power!.
The crank on the 6G74 is different so you can't just fit that to your block.
If you want to call 08 83496960, I can explain what you need to do as its a long story for a one finger typist.
Steve
The crank on the 6G74 is different so you can't just fit that to your block.
If you want to call 08 83496960, I can explain what you need to do as its a long story for a one finger typist.
Steve
Someone in the US used a 3.8 Pajero block with the 6G74 (3.5 V6) heads but I can't remember if he used the SOHC or DOHC heads.
Also can't remember if he used the 3.5 injection or the drive by wire 3.8 set up.
The guy is on Trail Talk - Old Colt is his username I think.
Also can't remember if he used the 3.5 injection or the drive by wire 3.8 set up.
The guy is on Trail Talk - Old Colt is his username I think.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 9 guests