Guys,
I have an MK dual cab, and am wanting to finish setting up my dual battery system by getting power into the tray. Has anyone done this before, and if so, where did you run the cable into the tray? I have a plastic liner in mine, so I can see if there are any factory grommets or the like to run the cable through. Im fine running cable from the engine bay to the rear, but if possible, id like it to enter the tray withough having to cut/drill any metal.
Any help would be great.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
power to tray in MK triton
Moderator: -Scott-
power to tray in MK triton
98 MK Dual Cab, Alloy front bar, sports bar, alloy wheels. Soon to come 2inch body lift and 33's
Most vehicles i fit out with 12v plugs in the tub , i usually run the 6mm 2 core down the chassis to one of the tail-lights and gain access to the tub from there. Some do not require drilling, however some do not have access from the tail-light cavity and need to be drilled. I cant think of how the Triton's are setup sorry.
Who is online
Users browsing this forum: No registered users and 0 guests