Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

89 hilux should i buy

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

89 hilux should i buy

Post by big lux »

Ok found a 89 hilux 4x4 2.8 diesel non turbo, manual, pizza cutter tyres, broken handbreak cable, busted drivers seat, Bit rough looking could do with respray, passenger door rusted out needs replacement, no other rust to see runs and drives ok. alloy tray.for $1500 3 mnths rego too. Whats your thoughts guys?
Last edited by big lux on Thu Jan 28, 2010 9:18 am, edited 1 time in total.
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

Post by damo lux »

Sounds OK, it would be worth that in parts!
Posts: 137
Joined: Sat Dec 15, 2007 4:29 pm
Location: newy

Post by wardy1 »

Thoughts on whats? So far all you have done is given us a vague description of a junk heap...
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

As the topic (the big thing up in the lhs corner) says should i buy for this price?
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 137
Joined: Sat Dec 15, 2007 4:29 pm
Location: newy

Post by wardy1 »

big lux wrote:As the topic (the big thing up in the lhs corner) says should i buy for this price?
To do what exactly? Burn it to the ground? make it a low rider POS? dump a v8 in it and comp 4x4 it?
No one is a mind reader, you need to explain what you mean, like this thread has been up for 5 hours and still no-one has actualy replied... does that not say somthing to you?
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

yea fair point. my gq is big heavy on fuel slow and attracts attension. Was thinkn of tidying up the lux a little bit nd chuck the 33s under the house on it and use it as a daily driver be handy to cuck my tools in the back ect. then maybe cn mod my gq sum mre.
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 246
Joined: Wed Jun 03, 2009 2:01 pm
Location: Ipswich

Post by Narrowscopeofreality »

Sounds pretty good to me..
'96 Lux - DD
'79 BJ40 - Project
'81 BJ42 - Got the bug
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

Id buy it, but thats me.
You are going to not like the comfort of it at all after having a gq(coils).
The leaf springs are as hard as a few flat pieces of steel mounted together and used as springs.
You say it has a snapped handbrake cable, all luxes have shitty handbrakes, mine included.
You say that it has some rust, most luxes have rust, mine included.
Cheese grader tyes, Im unfamiliar with this term but you should be able to put 31s on 15x7 straight on with no dramas, 33s may require some lift, which is easy.
Its a bit rough, well its an old lux.
Just make sure you check everything possible, ie; floor for rust, a-pillar for rust, not too much smoke out of the exhaust, the usual stuff.
It might be lacking on road power, but I tell you what though, put it in low range, and hit the hills, and it will come alive.
But Id buy it.
But Im biased.
Now go buy that lux, build it up and use the gq as the towcar.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

DUDELUX wrote:Cheese grader tyes, Im unfamiliar with this term but you should be able to put 31s on 15x7 straight on with no dramas, 33s may require some lift, which is easy.
I think he means "cheese cutters", or i preffer "pizza cutters", as generally cheese cutters are actually a string of thin wire strung between two posts (unlick a pizza cutter, which is a very skinny wheel).
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

coxy321 wrote:
DUDELUX wrote:Cheese grader tyes, Im unfamiliar with this term but you should be able to put 31s on 15x7 straight on with no dramas, 33s may require some lift, which is easy.
I think he means "cheese cutters", or i preffer "pizza cutters", as generally cheese cutters are actually a string of thin wire strung between two posts (unlick a pizza cutter, which is a very skinny wheel).
What he said :D
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 899
Joined: Mon Jan 01, 2007 8:11 am
Location: West Seedknee

Post by 4bdan »

As long as the drivline is on good nic, then I would buy it. The rest is just easy to fix and mod...
Back in a Lux again...
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

4bdan wrote:As long as the drivline is on good nic, then I would buy it. The rest is just easy to fix and mod...
I'd also check out the "normally" overlooked stuff like:

- swivel hubs
- wheel bearings
- shackle pins
- shackle bushes
- upper front control arm bushes
- steering box
- draglink linkages
- tierod ends
- uni joints
- tailshaft centre bearing

These are common to go on Hilux's, and although the individual items aren't overly expensive, add it all up and its a fairly hefty repair bill.

I had a look at an '87 2.4D ute a few weeks ago, and while the tray/body was in less-than-average condition, the driveline revealed years of neglect and farm abuse. Even to replace the components above it still wasn't worth the bargain price the car was for sale for.
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests