Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

relocating rb30 alternator

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 63
Joined: Thu Aug 28, 2008 8:44 pm
Location: Gold Coast

relocating rb30 alternator

Post by mat_p »

after searching to no avail, i figured i would ask the questions...
does anybody have any info and/or pics on moving a rb30 alternator up higher in the engine bay??
from stock they are stupidly low and i have killed a couple of them despite my best efforts to clean them out etc.
will be either rebuilding my current one (noisy bearings) or swapping in a higher amp alternator in the near future...so i figured why not move it while im at it.
more specifically, im after bracket designs i could model off...this is the bit that has got me stumped.
cheers.
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Your right if you wheel in mud you kill them lots, I do at least 1 a year, search twin turbo patrol on here from memory he moved em to the top on drivers side, I was to lazy and just rebuild them.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 63
Joined: Thu Aug 28, 2008 8:44 pm
Location: Gold Coast

Post by mat_p »

lol, yeh but getting them out is a pain in the ass :P ...taking my mates 4.2efi alt out was so easy as from stock it was right up high...had it out in about 2 minutes.
thanks for the info, will look it up :)
Top
Posts: 63
Joined: Thu Aug 28, 2008 8:44 pm
Location: Gold Coast

Post by mat_p »

http://www.outerlimits4x4.com/ftopic170 ... highlight=

when you said twin turbo i knew it was narnturbogq...spewin, he doesnt have a good clear shot of how the alternator is bolted down.
anyone else got some info??
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

I get them out in less than 10 minutes so I'm not fussed, still a stupid spot but they just copied it of the skyline and VL
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Is the RB30 alternator in the same spot as the RD28

Could be a quick fix with standard brackets . :?:
GQ with big nuts
Top
Posts: 104
Joined: Fri Apr 11, 2008 10:34 am
Location: Bendigo, Victoria

Post by narnturbogq »

Mat_p Ive cracked the camera out and taken a few pics for you.

The basic setup is an endless air in the factory alternator position, running off the crank, with the factory tensioner bracket modified.
A belt runs of the endless air up to the alternator. ive used a 130 amp landcruiser one, and it is awesome charging the batteries quick.
The bracket is a piece of angle bolted onto the inlet manifold, where the coil bracket bolts on, and theres a brace back on to the head.

Its a bit hard to get good shots with the wiring, etc in the way but here they are.

Image
Image
Image
Image
Image
Top
Posts: 63
Joined: Thu Aug 28, 2008 8:44 pm
Location: Gold Coast

Post by mat_p »

champion :)
thanks for that mate :)
im assuming i will need endless air?? that being said, i will look at everything in the light tomorrow to see what i can do :)
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 31 guests