Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
best legal way to got good flex out of a hilux
Moderators: toaddog, Elmo, DUDELUX
best legal way to got good flex out of a hilux
what is the best way to get good flex out of a hilux
what would you have to do to put it on a 44/4 brum
any hlep?
what would you have to do to put it on a 44/4 brum
any hlep?
Re: best legal way to got good flex out of a hilux
mattklippert wrote:what would you have to do to put it on a 44/4 brum
any hlep?
pick it up wif a crane and put in down on top of the drum
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Thanks to:
Polyperformance
Yuri 4x4
Longfield
can do that want to make it flex like your's and killalux
Last edited by mattklippert on Thu Mar 04, 2004 9:27 pm, edited 2 times in total.
i was only play wif ya..
is it IFS or solid front ??
if its ifs chop it out and get a solid axle in there.
if it solid axle front already, get some IFS rear springs, put them in the back with a 2" block under them and some 8-9" shackles, then put your original rear springs in the front, go crossover steering and then get it engineered 2 easy
is it IFS or solid front ??
if its ifs chop it out and get a solid axle in there.
if it solid axle front already, get some IFS rear springs, put them in the back with a 2" block under them and some 8-9" shackles, then put your original rear springs in the front, go crossover steering and then get it engineered 2 easy
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Thanks to:
Polyperformance
Yuri 4x4
Longfield
well mine isnt exactly all legal,
but a run xd falcon rear springs with custom main leaves, and superior shackles on the rear, and in that pic i was running parabolics in the front with shock hoops and long shocks.
i now run hilux rears and crossover in the front.
the only thing on mine that would be unable to be engineered i would say are the shackles.
but a run xd falcon rear springs with custom main leaves, and superior shackles on the rear, and in that pic i was running parabolics in the front with shock hoops and long shocks.
i now run hilux rears and crossover in the front.
the only thing on mine that would be unable to be engineered i would say are the shackles.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
the setup i am talking bout, not really u will keep bustin j-arms, how do i know have busted a fewmtb4x4mad wrote:Hypolux, would this setup work without the crossover steering?
just run crossover with a flipped arm on the passenger side its waaaaaaay cheaper than histeer and does the same job basically
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Thanks to:
Polyperformance
Yuri 4x4
Longfield
even though my setup is untested and uninstalled, in the shed i have ifs rear springs, custom rears for front 2inch dropped hangers and extended shackles. and al that will be able to be engineered and should flex well.... setup cost $420. so pretty much mine will be similar to hypo's
(ps, car already has cross over )
(ps, car already has cross over )
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Budscustoms Facebook Page
Aza wrote:even though my setup is untested and uninstalled, in the shed i have ifs rear springs, custom rears for front 2inch dropped hangers and extended shackles. and al that will be able to be engineered and should flex well.... setup cost $420. so pretty much mine will be similar to hypo's
(ps, car already has cross over )
HEY AZA IS THAT PUSHY GETTING HARDER 2 PEDAL ROUND NOW WITH ALL OF THAT EXTRA METAL U R TALKING BOUT ??
KEEP DREAMA YOUR PUSHY WILL NEVER B LIKE THE HYPOLUX
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Thanks to:
Polyperformance
Yuri 4x4
Longfield
hypolux wrote:Aza wrote:even though my setup is untested and uninstalled, in the shed i have ifs rear springs, custom rears for front 2inch dropped hangers and extended shackles. and al that will be able to be engineered and should flex well.... setup cost $420. so pretty much mine will be similar to hypo's
(ps, car already has cross over )
HEY AZA IS THAT PUSHY GETTING HARDER 2 PEDAL ROUND NOW WITH ALL OF THAT EXTRA METAL U R TALKING BOUT ??
KEEP DREAMA YOUR PUSHY WILL NEVER B LIKE THE HYPOLUX
bikes be gone for a while dude. dad threw it out couple of months ago
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Budscustoms Facebook Page
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=5728&highlight=cross+steering
that might help u
that might help u
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Budscustoms Facebook Page
Who is online
Users browsing this forum: No registered users and 0 guests