Looking at some B'stone D693's
265/75R16 $215
275/70R16 $225
265/70R16 $259!
Perth $
any trouble in fitting any of these to the Jack.
It doesn't sag at all and is not raised. Normal!
245/70R16 are the norm.
75% Bit 15-20% sand 5-10% gravel
cheers
wolf
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
265/75R16 fit a 94 jack?
Moderator: Moderators
Hi Wolf,
265/75R16 I think is fairly close to a 32" tyre which is what I have. Mine do rub even with the 2" lift but really only because of the wide offset of my wider 8" rims. If you are using your 7" rims and a narrower tyre it may be ok but I dont know for sure as I have never tried that combo. Maybe you can ask the tyre shop to fit a couple of options and see what fits...
Noel
265/75R16 I think is fairly close to a 32" tyre which is what I have. Mine do rub even with the 2" lift but really only because of the wide offset of my wider 8" rims. If you are using your 7" rims and a narrower tyre it may be ok but I dont know for sure as I have never tried that combo. Maybe you can ask the tyre shop to fit a couple of options and see what fits...
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
You have an OME suspension lift though dont you Gazza?
Wolf, I know that the 245/75R16 does fit without any lift because thats what was I had on my Jack when I bought it pre lift. Is suspension lift out of the question at this stage or are you gonna do something later?
Noel
Wolf, I know that the 245/75R16 does fit without any lift because thats what was I had on my Jack when I bought it pre lift. Is suspension lift out of the question at this stage or are you gonna do something later?
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Noel
I ran 265 /75/16 before I got ome suspension on the standard jackaroo offset rims. It rubbed slightly on the sway bar on the front on full lock but its no problem and no problems on the back. my 32/ 11.5 bfg`s do rub on the front, because of the offset ,even with ome lift
The ome don’t give any lift on the front and only 25mm on the back. So up when the torsion bars and now I have Dobson 80mm spring lift on the back.
Garry
I ran 265 /75/16 before I got ome suspension on the standard jackaroo offset rims. It rubbed slightly on the sway bar on the front on full lock but its no problem and no problems on the back. my 32/ 11.5 bfg`s do rub on the front, because of the offset ,even with ome lift
The ome don’t give any lift on the front and only 25mm on the back. So up when the torsion bars and now I have Dobson 80mm spring lift on the back.
Garry
Ended up getting 265/70R16 in the
Bridgestone new style A/T's called 694's
which replace the 693's.
Did Kalbarri, soft sand some mud along the Murchison
and some rock work too, inland and coastal.
Bloody beautiful. Stood up to the rough and soft stuff.
Size is spot on no rubbing and fills the wheel arch nicely.
Bridgestone new style A/T's called 694's
which replace the 693's.
Did Kalbarri, soft sand some mud along the Murchison
and some rock work too, inland and coastal.
Bloody beautiful. Stood up to the rough and soft stuff.
Size is spot on no rubbing and fills the wheel arch nicely.
Who is online
Users browsing this forum: No registered users and 0 guests