Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Range rover Diffs in a 88GQ

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 19
Joined: Sat Jun 21, 2008 12:38 pm
Location: Browns Plains, Sth Brisbane

Range rover Diffs in a 88GQ

Post by Dutchy74 »

Hi Guys,

i have heard that the Diff's in range rovers can fit and run in GQ'.......can anyone confirm these rumours..if so can you share you infinite wisdom.

any feedback would be welcome.

P.S. I have found a 1973 Range Rover with ARB air lockers going cheap and wondering if they will fit my 88 GQ ?

Cheers
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

lol that would be one for the books.

I guess it is possible but nobody would do it, people put GQ diffs under RRs because the RR ones are too weak.
This is not legal advice.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Simply DON'T DO IT.

People put GQ diffs into range rovers because RR diffs and axles are weak and troublesome.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Do it.

So many reasons why.
Land Rover Discovery - GQ conversion underway
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

This same question has been posted by the same person in the Rover, Nissan and now Gen Tech areas. Can I hear the bus warming up?
TD 80 Series, F&R Lockers, Winch etc
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi Dutchy74

It is a very great idea. You get smaller track width and you get smaller breaks.

But if you want to go serious, put a Toyota 80 gearbox in your GQ too.
And for the engine - use something from nissan - the 3.0 Diesel is a top motor and will fit perfect to your axles / gearbox combo.

But the best would be, just sale you Nissan GQ and buy a Lada Niva.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Range rover Diffs in a 88GQ

Post by bogged »

You may find your answer in 20 other sections.

search for threads by "Dutchy74"
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

I put Range Rover Diffs in my 91 GQ.

To take them to the swap meet to sell.
:rofl: :popcorn: :snipersmile:
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

LOCKEE wrote:I put Range Rover Diffs in my 91 GQ.

To take them to the swap meet to sell.



:rofl: :rofl: :rofl:

seriously its a down grade.... even with the lockers.
GU td42 ute with go fast bits and go futher bits
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

LOCKEE wrote:I put Range Rover Diffs in my 91 GQ.

To take them to the swap meet to sell.
what did you get for them, some lego blocks?
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

bogged wrote:
LOCKEE wrote:I put Range Rover Diffs in my 91 GQ.

To take them to the swap meet to sell.
what did you get for them, some lego blocks?
Ha Ha, bit more than that.
:rofl: :popcorn: :snipersmile:
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: Range rover Diffs in a 88GQ

Post by joeblow »

Dutchy74 wrote:Hi Guys,

i have heard that the Diff's in range rovers can fit and run in GQ'.......can anyone confirm these rumours..if so can you share you infinite wisdom.

any feedback would be welcome.

P.S. I have found a 1973 Range Rover with ARB air lockers going cheap and wondering if they will fit my 88 GQ ?

Cheers

did i miss something?.........has april the 1st been and gone?................







:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Ruffy wrote:Simply DON'T DO IT.

People put GQ diffs into range rovers because RR diffs and axles are weak and troublesome.
X eleventy BILLION!!!
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

PacMan wrote:Hi Dutchy74

It is a very great idea. You get smaller track width and you get smaller breaks.

But if you want to go serious, put a Toyota 80 gearbox in your GQ too.
And for the engine - use something from nissan - the 3.0 Diesel is a top motor and will fit perfect to your axles / gearbox combo.

But the best would be, just sale you Nissan GQ and buy a Lada Niva.
Do NOT listen to this man!! Stop picking on the poor n00b!! Leave him alone!!


But we CAN grave dig this thread in the future to embarrass that CRAP out of him!!!

RR diffs..........................in a patrol....................BWAHAHAHAHAHAHAHAH!

:D :D :D :D :D :D :D :D
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

i'm just posting here so i can grave dig this in 10 years time
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 110 guests