Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

question about tacho for 40 series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 134
Joined: Wed Nov 26, 2008 11:41 pm
Location: QLD

question about tacho for 40 series?

Post by 4x4joel4x4 »

Hi all quick question???

were is the wire that i connect to my tacho for a deisel i have tried the alternator i dont know if it has a distributa cap but i dont think its that either any help would be much apreiciated thanks.

JOEL :?: :?: :?: :?: :cry: :cry:
Last edited by 4x4joel4x4 on Sat Feb 06, 2010 4:26 pm, edited 1 time in total.
Top
Posts: 32
Joined: Sun Jul 12, 2009 3:06 pm
Location: penrith

Post by hiluxturbo2.4 »

if its a petrol engine you connect it to the negetive side of the coil
84 4runner 2.4td 35's 4.8s widetrack rear. ifs rears.rear air locker
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

Not sure if the B came with a tacho. On the 3B its on the top of the bellhousing on the drivers side.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 134
Joined: Wed Nov 26, 2008 11:41 pm
Location: QLD

Post by 4x4joel4x4 »

shorty_f0rty wrote:Not sure if the B came with a tacho. On the 3B its on the top of the bellhousing on the drivers side.
ok then i will have to check it out i will let you know
Top
Posts: 134
Joined: Wed Nov 26, 2008 11:41 pm
Location: QLD

Post by 4x4joel4x4 »

shorty_f0rty wrote:Not sure if the B came with a tacho. On the 3B its on the top of the bellhousing on the drivers side.
o and no it dosent come with a tacho that is why i am hooking one up is there a way to hook it up manualy?

regards Joel
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests