Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

arb brush bars

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

arb brush bars

Post by thehanko »

Hey all,

just picked up an 03 gu ute :cool: coils are so nice after the leafy lux!

it has arb bull bar, side steps and brush bars.

after having a lux im a bit more concerned about keeping the panels straight on this one and as its significantly wider etc i feel like ill be more likely bend the bugger.

Im assuming the side steps (tube frame with checkerplate tops) will offer minimal or no protection compared to sliders, but mainly will the brush bars do anything to protect the front qtrs?

I have a set of sliders im looking to mod to put under it and am trying to work out if i should keep the brush bars and mod them to fit to the slider.

If i do keep them would it be worth making a clamp on system which braces from one across the top of the bonnet to the far side? I just cant see them doing much in their current set up other than bending into the car.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

i had the same steps and brush bars on my gu ute. the steps were useless, did more damage than good. (I ended up with a checkerplate imprint in my sills :cry: )

Built sliders and adapted the brush bars into them. While I dont think they will provide 100% protection, I like the fact they protect my flares (have you priced one :shock: ). I also rolled my ute onto its side, the brush bar pushed in against the flare but didnt do any permanent damage. Snorkel stuffed the guard.

i dont know if a brace is worth it across the bonnet, as it has to curve around the guard, therefore creating a weak point. It wont make it any weaker though.

cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests