Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Rear radius arm dimensions?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

GQ Rear radius arm dimensions?

Post by MONGREL »

Just a quick question. Makin up some of my own arms etc, need the dimensions for the eye on the rear arms, OD and ID. Would be much appreciated, makin things up at work tonight so hence the reason for posting this question here. From memory the OD is 60 and ID around 49. Something
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

don't forget that the bushes are offset. i think that the mounts on the diff are slightly wider than the car. can't help you with measurements sorry
Top
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

Post by MONGREL »

Thats right they are, i've made rear arms before but i never kept all the measuerments.

Im makin a font arm, just need the ID of the boss to make one to weld in. Dont have any spare ones to measure this time.
Top
Posts: 9
Joined: Wed May 21, 2008 8:53 pm
Location: Tasmania Greater Hobart

Post by Grinbuilt »

I did mine at 49.8mm ID,rubber bushes were a nice tight fit.
Top
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

Post by MONGREL »

Thanks mate, finished it off tonight at 49.5 bit of a sand out with die grinder should fix it up. Not too big, thats the main thing.

Anyone thinkin of makin some write it down. 59.8 for front radius arm bushes too.
Top
Posts: 129
Joined: Sun Jun 29, 2008 4:10 pm
Location: Melbourne, Victoria, Australia

Post by striga22 »

the best way to do your trailing arms is to cut them in half and sleve them
need some plumbing done? cashies top quality job for cheaper south east melbourne Daniel 0423771198
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests