Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
supercharge my td42 diesel help me plz!!!
supercharge my td42 diesel help me plz!!!
hi all..
i have a n/a td42 diesel... i am looking to supercharge it... does anyone have any details on it or has anyone done it????? anything will be greatly appreciated
CHEERS
matt...
i have a n/a td42 diesel... i am looking to supercharge it... does anyone have any details on it or has anyone done it????? anything will be greatly appreciated
CHEERS
matt...
It can be done, you need a blower of a suitable size, M90 at the absolute minimum. Expect to spend a lot of time and effort on a belt system that won't slip in mud, won't squeal in dust and won't destroy belts in rocks. So this means a serpentine belt of about an 8pk or wider or perhaps a tripple V belt. I have seen a double V belt work with moderate sucess on a TB45 blower kit, slippage still an issue. Machine up some pulleys, get a heavy duty tensioner with lots of travel, move the radiator /shroud/fan to make it all fit and pretty much away you go. I'd strongly suggest an after cooler to as P.D. blower produce high air temps.
Cheers
Joel
Cheers
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
i would choose a Eaton m112 if i was to do it again allthought the m90 is totally adequate boosting at up to 10pounds if you get your drive ratios right. you dont need to move the radiator but you will need to move the power steer pump and space the fan forward about 25mm. mine is intercooled and yes it was a lot of extra work but remember everything is custom. any specific questions just ask.
oh and for those who are knockers or want to know why i would bother it only cost me 470 for the charger and intercooler so why not
oh and for those who are knockers or want to know why i would bother it only cost me 470 for the charger and intercooler so why not
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Simple, because its easy, simple bolt on job. And theres countless people who've done it to help with turbo selection or kits etc, plus they get great power and fuel economy.bobrocket wrote:What are some pro's and con's of Turbo vs Supercharger.
I've been swaying towards doing a supercharger mod as well but there must be reasons why everyone does the Turbo mod.
i have been wondering this aswell. and i have thought that a supercharger would be better, as you will have boost from idle. am i corect in thinking that? whereas a turbo, will only create boost as the rite revs.
cheers
jbates58
cheers
jbates58
Bingham wrote:At dennis fergo's funeral will they be saying what a great bloke!
sprungupcruiser wrote:you're like the herpes of the fabrication business.
I have no dramas with the supercharger ... it did its intended job to get the wagon off the line reasonably quickly but replacing belts etc makin sure theres no slip etc etc etc and moving stuff in the engine bay to get it all to fit in blah
PAIN IN THE ASS + it definately needed an intercooler superchargers get hot
No easy flexability to increase performance with out changing pullies.
to get it to work right you also need a decent exhaust system, extractors n what not
and last of all the angry cat was novel for about 5mins it just seemed to echo out of the snorkle
turbo simple easy FLEXABILITY to run 9psi - 25psi pending on turbo of course
piping for intercooler is alot easier too as there is more room on that side of the engine bay
but definately don't let what we all say put you off the supercharger
if you have your heart set on it its a good project
still waiting to see RMP&O's supercharged and turbo'd SD33
PAIN IN THE ASS + it definately needed an intercooler superchargers get hot
No easy flexability to increase performance with out changing pullies.
to get it to work right you also need a decent exhaust system, extractors n what not
and last of all the angry cat was novel for about 5mins it just seemed to echo out of the snorkle
turbo simple easy FLEXABILITY to run 9psi - 25psi pending on turbo of course
piping for intercooler is alot easier too as there is more room on that side of the engine bay
but definately don't let what we all say put you off the supercharger
if you have your heart set on it its a good project
still waiting to see RMP&O's supercharged and turbo'd SD33
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
the trouble with turbo's is they are reactive, they react to how much fuel you pour in, so boost is always one step behind the fuel. especially in low gears you simply don't make the boost as the motor has rev'ed faster than the turbo can to supply the air.jbates58 wrote:i have been wondering this aswell. and i have thought that a supercharger would be better, as you will have boost from idle. am i corect in thinking that? whereas a turbo, will only create boost as the rite revs.
cheers
jbates58
i know of a few guys with supercharged Toyota's and the one big advantage if instant power regardless of rev's, load, gearing etc.
however no economy advantage like a turbo has for normal driving. tho some disconnect/bypass the supercharger to save some fuel.
supercharger simply makes the motor act like a bigger atmo motor.
turbo is better for regular driving and easier to fit.
...
Last edited by 351ciofgrunt on Mon Feb 15, 2010 7:12 am, edited 1 time in total.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
I've heard from others as well, that you can put a clutch type system to disconnect the supercharger for day to day driving.
I've asked a few companies for more info on running superchargers, prices, fabrication etc, including how to turn it off for daily driving, so hopefully they'll get back to me soon.
I've asked a few companies for more info on running superchargers, prices, fabrication etc, including how to turn it off for daily driving, so hopefully they'll get back to me soon.
with my eaton i have intercooled i witch i asure you was not an easy job but well worth it. I run a 6pk belt with falcon auto tensionerand the power steer on the same belt. the only problem with this is all of my drive pullies are custom and i have slight slippage over 9psi due to the bracket in the supercharger flexing and this will be sorted soon. as for boost off of idle yes mine runs 2psi at idle bout 6 at 1200rpm and 8 from 1800 to 3000 and 10 above that . I am yet to do the exhaust and hope to get more improvement after that, but it pulls like a freight train with egt's maxing at 650c with no smoke. As fore fuel economy idon't get any economy at all with the best sofar being about 350km out of 85l ouch.
Over all i am happy with my setup as it is not a daily driver and great for four wheeling as the power comes on very smooth and with heeps of touque down low. and for less than $1000 it can be done on a budget but you need to know someone to machine pullies for you.
brad
Over all i am happy with my setup as it is not a daily driver and great for four wheeling as the power comes on very smooth and with heeps of touque down low. and for less than $1000 it can be done on a budget but you need to know someone to machine pullies for you.
brad
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Who is online
Users browsing this forum: No registered users and 1 guest