i have recently noticed that my oil light never comes on under self test when starting car.. that is it never works.
I have checked the bulb and it is all good, placed a test lead between neg side of bulb on circuit board and car frame and bulb glows dimly.. therefore ok.
where to look next?? should i be investigating a sensor, plug etc??
Dont have a wiring diagram at the moment - if someone could post a pic of that section of their manual??
its a TD42 turbo for what its worth. 88 Maverick
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
oil light doesnt come on under self test (ie ever) TD42
measure resistance from each wire to ground (negative)??
ill check it at the plug. When the car isnt running i would expect a low resistance from the black to neg?...ie it earths causing the light to glow?
do u know what range (ohms) the cluster should operate over (full scale)??
i have noticed that the oil pressure 'appeared' slack... kind of assumed that it was the sender but thought it should make the light come on not stay off. ill get some reading when it stops raining.
cheers
ill check it at the plug. When the car isnt running i would expect a low resistance from the black to neg?...ie it earths causing the light to glow?
do u know what range (ohms) the cluster should operate over (full scale)??
i have noticed that the oil pressure 'appeared' slack... kind of assumed that it was the sender but thought it should make the light come on not stay off. ill get some reading when it stops raining.
cheers
the black wire should be a dead short to earth when the motor is off ( oil light )
the yellow wire should have no resistance with the motor off and have increasing resistance up to a dead short to earth at about 90- 100 psi
these commonly fail and aftermarket ones dont seem to last or work at all , genuine ones from nissan are around 130 ish bucks from nissan and should last another 15 odd years
the yellow wire should have no resistance with the motor off and have increasing resistance up to a dead short to earth at about 90- 100 psi
these commonly fail and aftermarket ones dont seem to last or work at all , genuine ones from nissan are around 130 ish bucks from nissan and should last another 15 odd years
should that be increasing resistance up to 'open circuit' to earth?? or does it should it acually start at 0, increase with pressure increase, until a point at 90-100 when it drops straight to zero?the yellow wire should have no resistance with the motor off and have increasing resistance up to a dead short to earth at about 90- 100 psi
cheers for the info. looks like ill prob be gettin a new one[/b]
yeh think ive downloaded it before too. is it the nissan one? not that it prob makes a bit of difference.BIG GQ wrote:Or just download it free from here
http://www.patrol4x4.com/forum/showthread.php?t=19193
Who is online
Users browsing this forum: No registered users and 11 guests