Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota 4AGE into a Vitara?
Toyota 4AGE into a Vitara?
Anyone out there put a 4AGE into a 93 Vitara?? Any help would be greatly appreciated. Cheers!
4age is more like mid 80's kw not 90's afaik.Blakezook wrote:Mine is the carby version. And 60kw compared to 93?kw doesn't quite cut it anymore.
I assume the engine sits north south in a vit? If so it will need a fair bit of modifying to suit a rwd application.
Do some research on corrolla forums.
The benefit of the 4a series is unlimited (within reason upgrades) and stock motors making 125 odd kw if you get the right ones, but peaky so dont expect to have all that power down low.
we actually found one already set up for a rwd application so havent had to do a full conversion but you need different exhaust manifold as the 4age exhaust goes under the sump stock instead of down the side. i think the ones of the sprinters suit. - we went aftermarket extractors to suit rwd set up, they are common as hell and under $300.
t50? i think the g box is called out of sprinters and celicas. is a 5 speed box to bolt upto the 4age. not sure but you could probably also get a custom bellhousing to suit your current gbox.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
or pm mud4b he did that conversion (in the green one and if its the one i think it is that motor was my old one) as far as i can remember
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
why are people choosing the 4age engine over the vitara EFI motor???
just curious...
Vitara 16v =
97.3 PS (96.0 bhp) (71.6 kW) @ 5600 rpm
132.4 Nm (98 ft·lb) (13.5 kgm) @ 4000 rpm
which is a TON of power for something weighing in at or under 1000kg, and packs a heap of torque.
I know the 4age is more powerful, but surely the work to get it in there etc isnt worth the hassle? especially with only a marginal (~10%) torque increase over the vitara engine?
just curious...
Vitara 16v =
97.3 PS (96.0 bhp) (71.6 kW) @ 5600 rpm
132.4 Nm (98 ft·lb) (13.5 kgm) @ 4000 rpm
which is a TON of power for something weighing in at or under 1000kg, and packs a heap of torque.
I know the 4age is more powerful, but surely the work to get it in there etc isnt worth the hassle? especially with only a marginal (~10%) torque increase over the vitara engine?
The worst thing about censorship is ███████.
cause people always want more 20% ish more kw's which is fun not necissarily usefull offroad.alien wrote:why are people choosing the 4age engine over the vitara EFI motor???
just curious...
Vitara 16v =
97.3 PS (96.0 bhp) (71.6 kW) @ 5600 rpm
132.4 Nm (98 ft·lb) (13.5 kgm) @ 4000 rpm
which is a TON of power for something weighing in at or under 1000kg, and packs a heap of torque.
I know the 4age is more powerful, but surely the work to get it in there etc isnt worth the hassle? especially with only a marginal (~10%) torque increase over the vitara engine?
because of the power up scene for corrollas its not unusual to pull 150kw out of these engines - wether or not people ever do that doesnt stop them saying 4age are awsome good for 150kw blah blah blah.
I cant see the power up options for vits being as plentiful or cheap.
power upgrades for the 4age are endless! engines are cheap but yes they would be more work to install. you go to a nice g box as well.
we did it as the car already had a carbi 4a in it so the upgrade to the 4age was easier and wish it would stop raining so we could finish it.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
there are two types of gearboxs for the 4age the t50 which has a hydralic clutch and another one which uses a cable.thehanko wrote:
t50? i think the g box is called out of sprinters and celicas. is a 5 speed box to bolt upto the 4age. not sure but you could probably also get a custom bellhousing to suit your current gbox.
4age zook ute in lots of bits
I'm investigating running a 4AGE (probably a 20V) in my sierra and I can think of plenty of reasons to run a 4AGE over a G16.
I've built and driven cars with EFI G16's and they are a great motor, and an easy fit (as a vitara motor)
They're adequate, but not awe inspiring. Cheap, reliable, neat, light and plenty of gearbox options. (sierra manual, vitara manual, and 3 and 4 speed auto)
However, if 70Kw isn't going to cut it, what do you do? Boosting a G16 isn't, in my opinion feasible on a $$ per HP scale. Getting the tuning right is just far too expensive, even if the parts aren't (but they might be)
The big problem I can see with the 4AGE and variants is the gearbox. The sprinter gearboxes are OK, but I really want a 4 speed auto and there's n bolt up option.
Steve.
I've built and driven cars with EFI G16's and they are a great motor, and an easy fit (as a vitara motor)
They're adequate, but not awe inspiring. Cheap, reliable, neat, light and plenty of gearbox options. (sierra manual, vitara manual, and 3 and 4 speed auto)
However, if 70Kw isn't going to cut it, what do you do? Boosting a G16 isn't, in my opinion feasible on a $$ per HP scale. Getting the tuning right is just far too expensive, even if the parts aren't (but they might be)
The big problem I can see with the 4AGE and variants is the gearbox. The sprinter gearboxes are OK, but I really want a 4 speed auto and there's n bolt up option.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Aparently there was a factory bolt up rwd 4 spd auto option but i am yet to find one.have tried more than once with no luck
Sprinter Gearbox's are ok you want the jap spec one (slave cyl on the right hand side)yes T5O
Don't touch the cable clutch box K50 it is not up to the task
The importer i used to work for in WA said he used to get 4spd auto rwd 4age's,
he never had anyone wanting an auto box so had sent them all to scrap before i started there .i was spewing
Sprinter Gearbox's are ok you want the jap spec one (slave cyl on the right hand side)yes T5O
Don't touch the cable clutch box K50 it is not up to the task
The importer i used to work for in WA said he used to get 4spd auto rwd 4age's,
he never had anyone wanting an auto box so had sent them all to scrap before i started there .i was spewing
AE71 panelvans came with 4AC's and 4 Speed boxes...that box will bolt right up to a 4AGEDrew wrote:Aparently there was a factory bolt up rwd 4 spd auto option but i am yet to find one.have tried more than once with no luck
Sprinter Gearbox's are ok you want the jap spec one (slave cyl on the right hand side)yes T5O
Don't touch the cable clutch box K50 it is not up to the task
The importer i used to work for in WA said he used to get 4spd auto rwd 4age's,
he never had anyone wanting an auto box so had sent them all to scrap before i started there .i was spewing
has anyone done this conversion into a zook?
Im keen to get one in mine!
GZ20 Soarer - 2JZ and T78
RJ70 Bundera - Sold
SJ Sierra - 31" MT117, 2.5" Springs, Shackles, Dual Lockrites, 2" BL and much more
RJ70 Bundera - Sold
SJ Sierra - 31" MT117, 2.5" Springs, Shackles, Dual Lockrites, 2" BL and much more
You sure it was a 4 speed? I have a 3spd AE71 Corolla auto bolted to my 20v 4age....Spoke to a lot of gurus of that era corolla around melbroune and no one mentioned the 4 spd...damn....would have been perfect to have better than 1:1 final drive....MR 1JZ wrote:AE71 panelvans came with 4AC's and 4 Speed boxes...that box will bolt right up to a 4AGEDrew wrote:Aparently there was a factory bolt up rwd 4 spd auto option but i am yet to find one.have tried more than once with no luck
Sprinter Gearbox's are ok you want the jap spec one (slave cyl on the right hand side)yes T5O
Don't touch the cable clutch box K50 it is not up to the task
The importer i used to work for in WA said he used to get 4spd auto rwd 4age's,
he never had anyone wanting an auto box so had sent them all to scrap before i started there .i was spewing
has anyone done this conversion into a zook?
Im keen to get one in mine!
shake down run for mine in a week and a half....after 30 months in the build
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
X2 - sure it was a 4 speed auto not a 4 speed manual
I wouldn't be surprised if there was a 4 speed auto sprinter in Japan though.
I'd be very, very interested in a viable 4 speed auto behind a 4AGE. I want to keep my 5.12 diffs and 6.4 transfer and still be able to run the highway.
Steve.
I wouldn't be surprised if there was a 4 speed auto sprinter in Japan though.
I'd be very, very interested in a viable 4 speed auto behind a 4AGE. I want to keep my 5.12 diffs and 6.4 transfer and still be able to run the highway.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Isnt the slush box an a24dl ?Gwagensteve wrote:X2 - sure it was a 4 speed auto not a 4 speed manual
I wouldn't be surprised if there was a 4 speed auto sprinter in Japan though.
I'd be very, very interested in a viable 4 speed auto behind a 4AGE. I want to keep my 5.12 diffs and 6.4 transfer and still be able to run the highway.
Steve.
An Asin Warner box found in toyotas and Volvo's used in dudlux autos etc .. should be a matter of the correct bellhousing . or bellhousing/gearbox adapter ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
doing one at the moment. all in and firing, just need to sort exhaust etc and were awayMR 1JZ wrote:AE71 panelvans came with 4AC's and 4 Speed boxes...that box will bolt right up to a 4AGEDrew wrote:Aparently there was a factory bolt up rwd 4 spd auto option but i am yet to find one.have tried more than once with no luck
Sprinter Gearbox's are ok you want the jap spec one (slave cyl on the right hand side)yes T5O
Don't touch the cable clutch box K50 it is not up to the task
The importer i used to work for in WA said he used to get 4spd auto rwd 4age's,
he never had anyone wanting an auto box so had sent them all to scrap before i started there .i was spewing
has anyone done this conversion into a zook?
Im keen to get one in mine!
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Who is online
Users browsing this forum: No registered users and 22 guests