Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Looking for a bit of help my GQ is lifted 5" springs 2" and runs 35" Baja claws, I brought it lifted etc, it has the castor plates on the front but i am still scrubbing out the front tyres,
To look at them it looks as if the tyres aren't running truely flat to the ground and as thou they are only running on the inside of the tyre.
Any ideas on how i can fix this i have spoken to a tyre/ wheel aligment guy (who is a dick mind you) and he said it happens to all jacked up nissans
Any help would be sweet as my front tyres are just about shot and idon't rely wanna put another set on and stuff them 2
in my experience i would say you got too much toe out or rooted wheel bearings mate easy enough too fix though !
4 in king springs, pro comp long travels, gu diffs, 4.6s ,front lokka,35" mtzs, custom made everything ,custom dual cab and a growing list of spare parts
if this prob wasnt there before you played with the wheel bearing id double check them to make sure they are still tight, it doesnt sound like toe out will be your prob unless youve been playin with your wheel alingment at the same time,
On my GQ when i got it i didnt notice the bent diff housing until i fitting the 35's. Wheel alingment didnt show it up but was making the tyre scrub on the body only on one side.
Also if the old owner offered you a Diff housing it sounds like he knew about it!!!!!!!
