Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coil over help race jackers??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

coil over help race jackers??

Post by oj ozzy »

hay all i need help setting my race jackers up in my 40
who will be able to help me around brisbane area??
i can take the truck any where on the flat bed.
cheers heaps
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Wizard have done a lot.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

ludacris wrote:Wizard have done a lot.

Cris
really?
he did say RACEJACKERS, coilover converted air shocks with hyd adjustable 2nd stage.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

Out of curiosity Greg have you had any thing to do with the race jackers?
Just after some good and bads of them. PM if ya dont want to post here mate.
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

i dont want to sound rude, but i want to get it right the first time. has any one had them done from wizard
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: .

Post by Micka »

oj ozzy wrote:i dont want to sound rude, but i want to get it right the first time. has any one had them done from wizard
There aren't that many people with them for Wizard to have done "a lot" of them. At around 6k per set they are out of most people's price range.

Have you spoken to Pete about setting them up and who he would recommend?
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

1MadEngineer wrote:
ludacris wrote:Wizard have done a lot.

Cris
really?
he did say RACEJACKERS, coilover converted air shocks with hyd adjustable 2nd stage.
:oops: I assumed he was talking about fitting them in the best configeration so they work.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

sorry lads there al ready fitted in to the truck i just need them to be fill and a adjusted
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Re: coil over help race jackers??

Post by TWISTY »

oj ozzy wrote:hay all i need help setting my race jackers up in my 40
who will be able to help me around brisbane area??
i can take the truck any where on the flat bed.
cheers heaps
oj ozzy wrote:sorry lads there al ready fitted in to the truck i just need them to be fill and a adjusted
Got any pics of your 40, sounds cool :cool:
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Re: .

Post by joshy »

oj ozzy wrote:sorry lads there al ready fitted in to the truck i just need them to be fill and a adjusted
Got mine gassed up by Pete the other day, you just need somewhere with Nitrogen gas. Going to adjust the coils myself as i use it.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

i will post some up soon i just need to get some piks.

i think im goin to give wizard or pete a call today cuz i would like to know how much psi rate i need for them..
cheers ppls
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

Pete just filled them till it lifted an inch or so above my intended ride height, it then settled to what i wanted. Think it was 340 or something in the fronts. But thatll obviously vary on weight of the car..
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

The fact they are a Race "Jacker" makes them no different to set up than a standard Race Runner shock. The Jacker section although incorperated in the shock is totaly seperate to the shock it's self. And has no effect on how the shock is set up. Air shocks are a trial and error set up. No 2 vehicles will ever be set up the same. As Joshy said you need to fill them to your ride height and then add or remove psi to suit. The amount of oil you use will make a difference on your bump stop and the oil weight will change how the shock reacts.

First person i would call is Pete to get a recommendation on who to talk to in Brisbane. But anyone who deals in offroad racing should be able to help you out.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Hang on a sec i just realised your talking about the Coil over race runners. Ive had no experiance with them and my above comment was regarding race runner air shocks. Call Pete.
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

cheers all
all is done now.
heres a few piks from today
Image
Image
Image
one more q, wat size winch would be good to pull my diff to my chassis
3000lbs??
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Ohh Boofa's old 40!

I use a small boat winch too pull my diff in
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

wats boofa's name on here??
i got the truck for 4g an put gq under her then the race jackers.
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

humphery is boofs outers name. I rang him thismorning and told him it was still kicking round. Its had a few owners since he built it. it used to be green. I think he sold it 2004ish.
Its a wheelbase thing
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

hay rhett i brought your old comp tray off you.
i know its had a few owner, cuz it was really dodgy lol e.g. like the starter motor switch wire, was holding up the hydro lines up from hitting the tail shaft lol all the wires where that bad i got rid of them.. but its a good base truck wat i payed for it an wat its strating to look like now.. she went out to the pipe forest today and blow a hydro line hahahaha unlucky but she will get there one day!
cheers every one for there help
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

40

Post by humphey »

Rhett wrote:humphery is boofs outers name. I rang him thismorning and told him it was still kicking round. Its had a few owners since he built it. it used to be green. I think he sold it 2004ish.
i'll c if i can find some pics
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

.

Post by lukes4x4 »

speak to the runnamuck boys in the mogrover. it runs them now and he has all the nitrogen and fitting to fill them . greg tinney
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
Posts: 56
Joined: Sun May 25, 2008 7:26 pm
Location: brisbane

.

Post by oj ozzy »

if you could find some picks would be grate... there all fill up now i just need to give the coils some movement..
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: .

Post by humphey »

oj ozzy wrote:if you could find some picks would be grate... there all fill up now i just need to give the coils some movement..
Image
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: .

Post by humphey »

WILL TRY TO FIND SOME , CAN SOME ONE RESIZE THIS
Post Reply

Who is online

Users browsing this forum: No registered users and 94 guests