Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1991 NH Running rough

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 7
Joined: Tue Jan 26, 2010 9:45 pm
Location: Newcastle

1991 NH Running rough

Post by kentmarcus »

I am new to Pajero's but have just recently bought a 1991 NH GLS 3.0L V6. It is is very good condition. However The engine seems to be running a little rough. It seems to be missing on cylinder 6.

To give the best description of what is going wrong i have uploaded 3 videos onto the following site.

http://www.pajventure.com/video/

Any help would be greatly appreciated.
Posts: 2
Joined: Tue Mar 24, 2009 9:22 pm
Location: victoria

Post by pajmofo »

yeah i just bought a 92 nh 3.0ltr and its doing the same thing just wondering did u fix it or are you still pulling your hair out lol
Posts: 11
Joined: Sat Jan 02, 2010 2:35 pm
Location: Brisbane

Post by alexiboris »

I could'nt get your videos to work. What tests have you done? How do you know it is cylinder 6? Have you checked spark? Injector pulse? Compression?
Posts: 2
Joined: Tue Mar 24, 2009 9:22 pm
Location: victoria

Post by pajmofo »

i finally got to having a look at mine and it was the dizzy cap and the firing order was not right. the only problem i have now is it has a flat spot from idle and a slight miss but it goes away at about 1500rpm any ideas
Posts: 8
Joined: Sat May 14, 2005 6:18 pm
Location: NZ auck

Post by scratcher »

start with the simple stuff. Compression check,at that age I wouldnt be surprises if burnt valves. Not a majorand valve stem seals can be replaced at same time.Go out at night when dark and look for spark jumping from leads, this be encouraged buy squirting with water from old kitchen pump cleaner bottle.They are a good old simple donkbut are worked hard pulling around those heavy nh bodies.
Posts: 7
Joined: Tue Jan 26, 2010 9:45 pm
Location: Newcastle

Post by kentmarcus »

I have fixed the video's so they should be working now.

In addition i have noticed that the problem gets better as the engine get hotter.
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests