SPECS FOR NEW 10000LB FAST RECOVERY WINCH

[tigerz11]

Is the free spool air operated, or do you need to turn a lever on the winch ????

you turn the leaver ,its 1st time every time engagement,,

[tuffgu42]

i'm a bit confused, is the new comp spec winch 2 speed aswell, or are the 9 and 12000pd winch only two speed cheers

[tigerz11]

i'm a bit confused, is the new comp spec winch 2 speed aswell, or are the 9 and 12000pd winch only two speed cheers

9 & 12 ARE TWO SPEED WINCHES

[hiy6o]

Hey tigerz11 are the 10000lb comp winches in stock yet ? Do you have any size specs yet as I would like to see if I can fit it in the bar I'm looking at .

[Suspension Stuff]

Hey tigerz11 are the 10000lb comp winches in stock yet ? Do you have any size specs yet as I would like to see if I can fit it in the bar I'm looking at .

They should be in stock late Feb early March.

[macca81]

hey paul, is it no longer possible to buy direct of your website? i notice that there are no prices and the only way to buy seems to be thru a reseller...

[tigerz11]

hey paul, is it no longer possible to buy direct of your website? i notice that there are no prices and the only way to buy seems to be thru a reseller...

Yes that is correct ,we need to look after the reseller and there prices will be the same so there will be no disadvantage for anyone.
Regards Paul

[macca81]

hey paul, is it no longer possible to buy direct of your website? i notice that there are no prices and the only way to buy seems to be thru a reseller...

Yes that is correct ,we need to look after the reseller and there prices will be the same so there will be no disadvantage for anyone.
Regards Paul

would it be possible for you to put the RRP on the website so as to give an idea to customers? altho i know the resellers in tas quite well, i do like doing my own research before purchasing and this includes having prices right next to the specs....

[Suspension Stuff]

hey paul, is it no longer possible to buy direct of your website? i notice that there are no prices and the only way to buy seems to be thru a reseller...

Yes that is correct ,we need to look after the reseller and there prices will be the same so there will be no disadvantage for anyone.
Regards Paul

would it be possible for you to put the RRP on the website so as to give an idea to customers? altho i know the resellers in tas quite well, i do like doing my own research before purchasing and this includes having prices right next to the specs....

You will find all the prices and specs here https://www.suspensionstuff.com.au/shop ... ath=63_255

Shane

[tuffgu42]

so the 9000pd and 12000pd are 2 speed? and the new comp spec winch is just a single speed?with better loaded rating then a high mount? ps will you be at the wandin 4x4 show on the weekend?

[tigerz11]

so the 9000pd and 12000pd are 2 speed? and the new comp spec winch is just a single speed?with better loaded rating then a high mount? ps will you be at the wandin 4x4 show on the weekend?

Yes ,PATROLAPART & 4X4 DIRECT will be there ,The standard 12000lb will be there and the 9000lb two speed ,the 12 two speed and 10 comp have not arrived yet ,about 2 weeks away
Paul

[gtir300]

Does the comp spec winch still have that load limiter device?

Have had issues with mine (My winch is about 18months old, so generation one version I think), where it has not let me release the load on the winch, first time i was anchored to a tree recovering a mate on a rocky track, winch would not wind in or out under load so we were both stuck, had to get another mate parked alongside to use his warn 9000 on single line pull to take the load on the stranded patrol. Replaced load limiter and end gear after this using parts under warranty - Tigerz11 were very professional and easy to deal with on this, i sent through a number of photos of all gearbox components, which was easier than sending the unit from WA.

Second time I was recovering another car from a partial bogging, winch would wind in no problem but would not release the load, only way i could release the load was to drive forward. I could hold my car on the brakes for this recovery, so the other car was not heavily stuck!

On both occasions winch has made loud clicking gear grinding noise when trying to release load. Yet 3 stage planetary gears were not worn or broken after the first issue; I have not taken winch out since the second issue a few weeks ago. Without load I could spool the winch up after both occasions.

I need to set up another winch session with video footage so i can determine what is going on and then discuss with Tigerz11.

I have also used the winch at other times on easier pulls with no fuss.

[tigerz11]

Does the comp spec winch still have that load limiter device?

Have had issues with mine (My winch is about 18months old, so generation one version I think), where it has not let me release the load on the winch, first time i was anchored to a tree recovering a mate on a rocky track, winch would not wind in or out under load so we were both stuck, had to get another mate parked alongside to use his warn 9000 on single line pull to take the load on the stranded patrol. Replaced load limiter and end gear after this using parts under warranty - Tigerz11 were very professional and easy to deal with on this, i sent through a number of photos of all gearbox components, which was easier than sending the unit from WA.

Second time I was recovering another car from a partial bogging, winch would wind in no problem but would not release the load, only way i could release the load was to drive forward. I could hold my car on the brakes for this recovery, so the other car was not heavily stuck!

On both occasions winch has made loud clicking gear grinding noise when trying to release load. Yet 3 stage planetary gears were not worn or broken after the first issue; I have not taken winch out since the second issue a few weeks ago. Without load I could spool the winch up after both occasions.

I need to set up another winch session with video footage so i can determine what is going on and then discuss with Tigerz11.

I have also used the winch at other times on easier pulls with no fuss.

the 10000lb will not have and the torque limiter

It sounds like the brake to me

All enqueries or warranty support you need to contact Ben
ben@tigerz11.com.au

Regards Paul

[mick80]

how much rope on the 10 000
cheers mick

[tigerz11]

how much rope on the 10 000
cheers mick

28m x 10mm

[Rhysta]

So any reports on this yet?

[tigerz11]

So any reports on this yet?

HASNT ARRIVED YET FOR ANY ONE TO TRY

[Hobzee]

Is the free spool air operated, or do you need to turn a lever on the winch ????

It's still lever action but being a low mount it rolls out with incredible ease, unlike a typical hi mount that really does need a free spool kit.

I have to give it to the Tigerz team, their winches get better and better every few months. Under heavy load like really big rocks or deep mud they do pull harder than an improved hi mount. It's only a matter of time and someone will have the nads to run one at a major comp and we can all see for ourselves on the track how it compares under pressure.

[tuff4runner]

any mor info yet an these winches, im very interested, what bar will thay fit into? wil that fit into a toyota landcruiser 80 series arb winch bar? thay can take the warn 9000lb but will it take the 10000 tigerz11 cheers anthony

[macca81]

any mor info yet an these winches, im very interested, what bar will thay fit into? wil that fit into a toyota landcruiser 80 series arb winch bar? thay can take the warn 9000lb but will it take the 10000 tigerz11 cheers anthony

the tigerz wnches, like 99.9999% of winches, use the same mounting bolt pattern as the warns... it will fit in 99.999999999999999999% of bars

[tuff4runner]

im after the mesument form the bolt hole to the end of the motor as if that is to long it wont fit lol!!!

[hulsty]

All the dimensions are on the tigerz11 website

[tigerz11]

im after the mesument form the bolt hole to the end of the motor as if that is to long it wont fit lol!!!

www.tigerz11.com.au/tigerz1110.pdf

[GQ WAGHOON]

Hope someone does run one in a comp, would be interesting.

[tigerz11]

The winches arrived today ,,and we should have them early next week

Paul

[tuff4runner]

whats the dutie sicle on all the winches? cheers

[jetjr]

Whats the difference between std 12000 and 2 speed 12000 aside from 2 speed capability?
Re waterproofing , longevity etc etc

Really asking is there a down side to 2 speed model?

[mnemonix]

Hope someone does run one in a comp, would be interesting.

I hear Team DGR are running a 2speed Tigerz11 one at TT2010 after recieving some sponsorship.
Will be great to see how the new winches perform under pressure.

[Suspension Stuff]

Hope someone does run one in a comp, would be interesting.

I hear Team DGR are running a 2speed Tigerz11 one at TT2010 after recieving some sponsorship.
Will be great to see how the new winches perform under pressure.

Yeah DGR are messing around with one of the 9000lb ones but I don't think anyone is running the 10,000lb ones in a winch challenge truck yet. The 12000 2 speed has performed very well in a winch challenge comp a couple of years ago in R&D testing.

Shane

[tigerz11]

10000LB FAST WINCH & 12000LB TWO SPEED
ARE NOW IN STOCK