Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Anyone bought from Rocky Road Outfitters direct?
Anyone bought from Rocky Road Outfitters direct?
Hey guys/girls I'm looking to buy a set of Rocky Road Outfitters 4 inch higher bolt on upper shock mounts for the front of my sierra as the stupid calmini setup keeps snapping bottom shock mounts as the shock is too long even with the bump stop spacers provided (Guess they never expected people to remove a leaf and actually flex it to the stops lol). I've read some bad feedback about Rock Road on Pirate but I wanted to know from any Aussie guys if they've ordered stuff from them before and if there were any dramas?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
http://www.rocky-road.com/zukmount.htmlronoor wrote:Any chance off a pic off these so i can fab sum up. cheers ronzook4fun wrote:i have a set of these from them, they took about 3 weeks to show up.
they would be pretty easy to make up, they are just rhs and plate steel
from http://www.izook.com/tech/samurai/suspe ... towers.htm
will take test set if your offering ron!
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
i have to agree, when i seen them i thought i could do the same thing. sold the car before i got a chanced to put them on.Kitika wrote:Why would you want to buy a set of mounts like that from the U.S.?You can make them for about $10 worth of steel and 2 old headbolts and an arc welder. That's what i did anyways
cheer up emo kid
WTF would you pay $65 US for those whn you can get these for $69 US from Lowrange???foolsp33d wrote:http://www.rocky-road.com/zukmount.htmlronoor wrote:Any chance off a pic off these so i can fab sum up. cheers ronzook4fun wrote:i have a set of these from them, they took about 3 weeks to show up.
they would be pretty easy to make up, they are just rhs and plate steel
from http://www.izook.com/tech/samurai/suspe ... towers.htm
will take test set if your offering ron!
[url]www.twinstickoffroad.com[/url]
They are about 4" higher from memory.GRPABT1 wrote:How much higher than stock are they? Do they clear big tyres well? Do they require chopping the gaurd or body lift? And are they bolt on?
Yes they clear big tyres, aslong as you aren't using really shit offset wheels.
No they do not require any guard chopping or BL
They are weld on. Plug weld through holes and weld around fish plates. Very strong, self aligning brackets for a great price. Why the phuck anyone would use those other peices of shit I do not know
[url]www.twinstickoffroad.com[/url]
So you don't need to plate the chassis rails with any extra steel or anything like that? Just weld straight on as they are in the holes and around the plates?Gutless wrote:They are about 4" higher from memory.GRPABT1 wrote:How much higher than stock are they? Do they clear big tyres well? Do they require chopping the gaurd or body lift? And are they bolt on?
Yes they clear big tyres, aslong as you aren't using really shit offset wheels.
No they do not require any guard chopping or BL
They are weld on. Plug weld through holes and weld around fish plates. Very strong, self aligning brackets for a great price. Why the phuck anyone would use those other peices of shit I do not know
hhmmm sounds appealing......
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
These don't have to be weld on, I have heard of a guy who used hi tensile roofing screws to fix them to the chassis (doesn't charge shitloads either )Gutless wrote:
WTF would you pay $65 US for those whn you can get these for $69 US from Lowrange???
Those hoops look heaps better than that other crap.
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Just weld 'em on.GRPABT1 wrote:So you don't need to plate the chassis rails with any extra steel or anything like that? Just weld straight on as they are in the holes and around the plates?Gutless wrote:They are about 4" higher from memory.GRPABT1 wrote:How much higher than stock are they? Do they clear big tyres well? Do they require chopping the gaurd or body lift? And are they bolt on?
Yes they clear big tyres, aslong as you aren't using really shit offset wheels.
No they do not require any guard chopping or BL
They are weld on. Plug weld through holes and weld around fish plates. Very strong, self aligning brackets for a great price. Why the phuck anyone would use those other peices of shit I do not know
hhmmm sounds appealing......
[url]www.twinstickoffroad.com[/url]
I Run full RUF and its no real issue. I just had to clearance the bump stop mount a little to stop the shockie from hitting when on full compression.ajsr wrote:looks to me like you can only mount the hoop style ones shown in the stock/one position, which may be a pain later if your moving your diff forward a fair bit at some stage.
may not be an issue though???
[url]www.twinstickoffroad.com[/url]
Discount would be better I've spent thousands thereGRPABT1 wrote:Righto you've sold me, maybe you should ask lowrange for commision lol.
Actually I am off to the states at the end of the month and will be dropping into Provo, UT to see Sean at lowrange, as I will be staying in Salt Lake City for a week.
I'll try and get a tour and some pics of the facilities whilst I am there.
[url]www.twinstickoffroad.com[/url]
They look better - but they don't look height adjustable when being installed, whereas the Rocky Road set do (sort of)...droopypete wrote:These don't have to be weld on, I have heard of a guy who used hi tensile roofing screws to fix them to the chassis (doesn't charge shitloads either )Gutless wrote:
WTF would you pay $65 US for those whn you can get these for $69 US from Lowrange???
Those hoops look heaps better than that other crap.
Peter.
GRPABT1 - i reckon you need to be measuring up those shocks to work out what height you really need your towers to be and then build your mounts accordingly. Or you could always put bigger bump stop extensions in there - they are much easlier to fabricate than a shock tower.
Grimbo Style speal off.
DMA Founding Member #1 - Now Retired
Who is online
Users browsing this forum: No registered users and 0 guests