Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

high beam trouble

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 18
Joined: Mon Apr 28, 2008 7:46 pm
Location: brisbane

high beam trouble

Post by CDH1987 »

hey guys... i have a problem with my high beam.... when my head lights are on low beam both are on... when i switch to high beam only the drivers side head light stays on and turns to high beam.. and the passenger side completly turns of..... but the weird thing is.. when i flash my high beam both light stay on and high beam comes in... can anyone help mi....????????????
Top
Posts: 64
Joined: Sun Aug 26, 2007 4:49 pm
Location: perth W.A

Post by MUNGA GQ »

check the relays.
next to the battery i think they are.
RIGHT FOOT FOR GO!!!
Top
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Mate does your high beam light on the dash still work?

Do your back ground dash lights come on when you have your headlights on? What are your tail lights doing?

It is very likely to be your light switch stalk as in hi/low beam lever.
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Top
Posts: 18
Joined: Mon Apr 28, 2008 7:46 pm
Location: brisbane

Post by CDH1987 »

tail lights are fine... dash lights are all good... and no the high beam indicator doest come on the dash....
Top
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

high beam

Post by cspgq »

yeah mine did the same it was the light witch stalk.
Top
Posts: 98
Joined: Tue Feb 10, 2009 7:17 pm
Location: ALEXANDRA HILLS

Post by REDNUT »

yeah combination switch for sure,

i found bursons was cheap for brand new ones in my old hilux
Top
Posts: 113
Joined: Sat Jul 12, 2008 8:59 am
Location: Sunshine Coast

Post by suggy126 »

Just pull the stalk off the stearing collum and give it a clean and clean the contacts with emery paper, piece off cake to do. Once you pull the stalk assembly there is a white/clear plastic on the back of it that can be pulled off (should be melted stalks holding it on kinda thing) under that are all the contacts. If you'r running higher powered headlights fit relays, it'll extend your switch's life span too.
Top
Posts: 18
Joined: Mon Apr 28, 2008 7:46 pm
Location: brisbane

Post by CDH1987 »

cheer heaps guys
Top
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

I have similar problem except both lights turn off when high beam get's fired up. Have been too busy to look into it but I might get excited and check the stalk this week.
Top
Posts: 10
Joined: Sun Apr 26, 2009 2:58 pm
Location: Brisbane

high beam

Post by madman89 »

pull apart/clean out/contact cleaner are the go. happens a bit on the gq's apparently
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 33 guests