Hey all,
I am curious!,
Lets just say that (mr X) has a leaf sprung 4x4, and he has a rather big crack in that leaf sprung chassis.
But (Mr X) comes accross another chassis with coil springs instead!
Do you think that (Mr X) could fit this, then use the leaf sprung chassis number to get the vehicle registerd again at Vic roads? Do you think they would know?
Thanks all
On behalf of Mr X
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Chassis number /Chassis varient question
Moderators: toaddog, TWISTY, V8Patrol, Moderators
mr x did the same thing in qld but due to rust. the trucks getting plated now and will be comp use only. not easy finding anyone willing to plate it either. for what its worth and mr x found this out the hard/expensive way sell the leaf sprung truck and buy something with coils. you will be so much better off. otherwise get some 9 inch shackles
speak to an engineer......
should be a straight forward body swap but wont be the original vehicle would need RWC, rego, etc as a different car
should be a straight forward body swap but wont be the original vehicle would need RWC, rego, etc as a different car
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Who is online
Users browsing this forum: No registered users and 1 guest