Hi all,
My 2002 SWB Mitsubishi Shogun starts and runs fine but as soon as I put the auto into drive or reverse the engine management light comes on and she goes into 'safe mode'.
I've cleaned the micro filters as this engine seems prone to blocking them, but now I am stumped.
Anyone any ideas? Any advice very gratefully received.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mitsubishi engine management light V6 GDI
Moderator: -Scott-
Trasmission control unit not functioning?
Bad connections/bad sensors/something wrong with transmission?
Get under and have a look around.
Generally the TCU would have an output to tell the ECU that it isn't happy and needs attention (via check engine light).
Bad connections/bad sensors/something wrong with transmission?
Get under and have a look around.
Generally the TCU would have an output to tell the ECU that it isn't happy and needs attention (via check engine light).
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Who is online
Users browsing this forum: No registered users and 0 guests