Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
V8 Conversion - 253/308, LS1/LS2 Questions???
V8 Conversion - 253/308, LS1/LS2 Questions???
Hi All,
i am tossing up the idea of exchanging my TB42 over to a V8, i have read some of the threads on here. my main question is: with the on board computer and wiring - where does this mount? and is it exposed to any water/mud.
i do enjoy deep water and mud - just concerned with these components getting wet/mud and the motor conking out - does any one have this issue with the LS1/LS2?
Alternately i was looking at a 253/308 or similar - something that does not have the wiring loom/CPU.
- Open to you varse array of experiences and rrecommendations of what style of V8 would suit my GQ.
Cheers
Dan
i am tossing up the idea of exchanging my TB42 over to a V8, i have read some of the threads on here. my main question is: with the on board computer and wiring - where does this mount? and is it exposed to any water/mud.
i do enjoy deep water and mud - just concerned with these components getting wet/mud and the motor conking out - does any one have this issue with the LS1/LS2?
Alternately i was looking at a 253/308 or similar - something that does not have the wiring loom/CPU.
- Open to you varse array of experiences and rrecommendations of what style of V8 would suit my GQ.
Cheers
Dan
LS1 no probs with the water, when i make a harness for them all relays and fuses go with the ecu, generally up under the dash somewhere.
That being said the LS1 ECU's are sealed and water resistant
Steve
That being said the LS1 ECU's are sealed and water resistant
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
dont waist your time and effort, just go the ls1 you'll be a lot happier, i spent heaps of money with turbo's, efi, aftermarket ecu's, intercollers, clutches, gearboxes and heaps more on my rb30, never mad good useable power, then the motor blew and i pissed it all off and dropped in a ls1 and auto it was the best thing i ever did, i recon i would have spent as much as the ls1 swap on the turbo set up which made an un reliable car, i never had a drama with the ls1, which is now going to get dumpped in my gu. plus the v8 sounds heaps tufferDutchy74 wrote:It has been siggested to Turbo the TB42... what size would you go - and where is brisbane would you go ??
I didn't know THAT!! That's a definite PLUS!! Combined with putting the ECU in the cab, that's a REALLY GOOD couple of things!!ludacris wrote:The LS motors run fine under water and you can mount the computer where ever you like. Cris
If you do, go the L76/L98 6 litre. WAY MORE low and mid range than a stock LS1.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Loose Screws 4wd Racing Team
What sort of $$$$ is ie for a L76/L98 6 litre...anyone around Brissy do this conversion...???bigbluemav wrote:I didn't know THAT!! That's a definite PLUS!! Combined with putting the ECU in the cab, that's a REALLY GOOD couple of things!!ludacris wrote:The LS motors run fine under water and you can mount the computer where ever you like. Cris
If you do, go the L76/L98 6 litre. WAY MORE low and mid range than a stock LS1.
Hey, I just bought a low k VE LS2 6.0L for $6000. I can do the conversions if you are interested. i am on the sunshine coast.
Steve
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Who is online
Users browsing this forum: No registered users and 29 guests