Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

surf into ute conversion has anyone done it before

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

surf into ute conversion has anyone done it before

Post by rusty_burrows »

hey guys
just seeing if anyone has done it before and if so do you have any photos

cheers russell
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Post by Evski »

It's called a HiLux... I think there is a buildup of one in the members section, but honestly I just dont see the point.
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Post by rusty_burrows »

its not just a hilux it would be a super space cab with a removeable soft top and a small tray like a dual cab
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

rusty_burrows wrote:its not just a hilux it would be a super space cab with a removeable soft top and a small tray like a dual cab
what about an extra cab hilux? same chassis etc as a surf and no hassels with the job and engineering etc. then shorten the back end if thats what you want or tube tray it.

im with above - dont see much point. there seems to be an obsession with chopping up wagons at the moment which dont need to be chopped.

eg chopping an 80 makes sence as you cant buy a landy ute other than a 70 series and they are not full coils.

but each to their own.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

look in Americant. have seen a few done over there...

only benifit of it i see it that you dont have to bother about putting coils into a lux... altho doin that would likely be easier than choppin a surf...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Post by rusty_burrows »

the main reason im looking into it is that it hasnt been done before and i think it will look quite good. i dont want to build the same old nissan patrol or hilux i want something interesting and fun to drive
i will start up a build thread and take photos and as im a mechanic the rego and the engeneer is the easy part just doing it wil be different
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Post by -Nemesis- »

I guess the main downside to all the work and cost would be that 99% of people will just think it's a Hilux?

What about drop a dual cab body on the chassis and a bobbed tray. Then mould the tray to the body so it looks like one full unit, something different.
Lovin the FZJ105-T, bling by Ryano
Posts: 1574
Joined: Tue Mar 21, 2006 7:34 am
Location: Greenbank - Home of the web wheelers

Post by booflux »

PM Ryano he has one its a bit long in the tooth now though so probably doesnt look as good as it should :finger:

The only pic I can find, its from about 2 years ago now so PM to see if he has any finished pics

Image
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Posts: 15
Joined: Sat Jul 19, 2008 6:26 pm
Location: Central Coast

Post by beerdog »

If that's what you want, then do it!

If everybody listened to the knockers, we'd all be driving stock white, non-turbo trucks with split rims and am radios.

There have been plenty of these chops done in the states and although it's not something that I'd do, I must say that I'm impressed with the biuld quality and finished product of quite a few of them.

Do a few searches and I'm sure that you'll find something similar to what you want.

When it's finished, you'll probably find a few of the knockers complementing your finished product. I know that I'm a fan of anything out side of the square, no matter what make or model.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

beerdog wrote:If that's what you want, then do it!

If everybody listened to the knockers, we'd all be driving stock white, non-turbo trucks with split rims and am radios.

There have been plenty of these chops done in the states and although it's not something that I'd do, I must say that I'm impressed with the biuld quality and finished product of quite a few of them.

Do a few searches and I'm sure that you'll find something similar to what you want.

When it's finished, you'll probably find a few of the knockers complementing your finished product. I know that I'm a fan of anything out side of the square, no matter what make or model.
its not so much the knockers as people throwing around other ways of approaching it/ looking at it.

an extra cab onto a surf chassis would be better IMO if you want the coil rear, but your still have to SAS the front if you want it to be fun to drive? if what i assume you mean by fun to drive is harder stuff offroad.

personally cutting down a surf makes no sence to me i would look at one of the other options made - as far as being different as mentioned above it will just look like a commonlux.

not that there is anything wrong with that ;)
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 21
Joined: Thu Jan 07, 2010 10:34 pm
Location: Perth Australia

Post by chocko »

My boy has a space cab Hilux and we have just picked up a complete Surf with a shanked motor. We are looking at dropping the 'lux body on the Surf chassis - shorter vehicle and coil arse end. Only problem I can see so far is that 2 of the mounts on the Surf chassis will have to be moved to match the rear mounts on the 'lux body.

Just got to get him motivated now!!
Posts: 140
Joined: Wed Dec 25, 2002 9:51 pm
Location: Gold Coast

Post by big red hilux »

yep my mates doing it at the moment it looks like a mid wheel base hilux
38.5 swampers, twin airlockers and a whole lot of right boot
Posts: 140
Joined: Wed Dec 25, 2002 9:51 pm
Location: Gold Coast

Post by big red hilux »

chocko just measure up the lenght of the cab and see if the back of the cab isnt gonna fowl wit tyre sizes cause u are going from 113 inch wheel base on a std hilux and a x cab is a bit longer than that to 107 inch of a surf...... i would just get a hilux and graft a surf rear end into it the chassie is the same width. i have done it wit my truck and works well..
38.5 swampers, twin airlockers and a whole lot of right boot
Posts: 21
Joined: Thu Jan 07, 2010 10:34 pm
Location: Perth Australia

Post by chocko »

The cab will fit fine. Same can't be said for the well body so we will make a custom tray.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

big red hilux wrote:chocko just measure up the lenght of the cab and see if the back of the cab isnt gonna fowl wit tyre sizes cause u are going from 113 inch wheel base on a std hilux and a x cab is a bit longer than that to 107 inch of a surf...... i would just get a hilux and graft a surf rear end into it the chassie is the same width. i have done it wit my truck and works well..
I thought Surfs were only 104", could be wrong though, I measured mine at 106" after moving the front forward 2"
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

go on pirate4x4 and check out the toyota sections.heres a few pics i had saved off there.....enjoy

Image
Image
Image
Image
Image
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I think they look ugly on a Gen 2 but great on a Gen 1.

Cheers
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Post by rusty_burrows »

the one im doing mine on is a ln65 model and i cut the body off it yesterday and so far looks great i will get out of the shed today and take some photos
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Post by rusty_burrows »

i have now put the pictures on the members thread surf into ute conversion is the tittle
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Just do it, because you want to do it, not because its never been done, never been done in 2010 is rare and if it hasnt been done there a reason :P, but as others have said anything you can dream of to do with 4x4s have been done in the US, except for patrols cause there to pov to meet the vigirous standard of the u.s :P haha (may or may not be false infomation)

I like the look of them, but personally i would put some good body armour on it, could think of nothing worse than dinting shit crap out of a body that has 100's of hours spent on it.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Spotted it in members, gen 1 :D
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

haha if i knew it was gen 1 i wouldnt of posted gen 2 pics.Good luck with it mate
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Post by rusty_burrows »

thanks guys i will keep you all posted in the members section
toyota hilux= just unbreakable
Toyota Prado = THE SHOPPING TROLLEY
##### can do all rego checks and defects except gas (lpg)#####
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests