old man just bought a 1996 rx 2.8turbo diesel patrol. and has come with a snorkel that's not connected.
is there any way you can connect it to the standard airbox. seeing that the inlet holes at the top and facing the bonnet.
or do we have to get the 4.2 airbox?
will post pic tonight
cheers adam
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gq 2.8 td snorkel
Gq 2.8 td snorkel
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
fj60,lifted,35s,33s for daily, 3f power!
I have a safari snorkle fitted to my 97 2.8lTD GQ. It has a safari filter box as part of the kit because the original filter housing is both moved forward and has different inlet and outlet orientations.
I don't know if the 4.2 filter housing is the go or not. Either way, its a bugger to get the filter in and out of the housing. Whatever you do, try to keep the maintenance access in mind - I have fitted all sorts of 'stuff' too close to the housing and compromised access.
When you do a filter change also, just make sure they give you the correct filter as the GU and GQ are slightly different in length - been caught on this already.
I don't know if the 4.2 filter housing is the go or not. Either way, its a bugger to get the filter in and out of the housing. Whatever you do, try to keep the maintenance access in mind - I have fitted all sorts of 'stuff' too close to the housing and compromised access.
When you do a filter change also, just make sure they give you the correct filter as the GU and GQ are slightly different in length - been caught on this already.
Pretty easy fix....just get a complete ZD 30 airbox out of a GU and fit it up.you will need to grind off the square flange where the airflow meter was fitted ....and a 90 degree rubber bend in 3 inch ...plus a short joiner pipe to join up to turbo intake hose. The inlet of airbox butts up against inner guard with some thick sealing rubber.
This setup also gives a lot better airflow than original ...plus is heaps easier to service. Downside is GU airboxes are not cheap second hand...and can be a bit hard to source.
HTH.
Cheers Keith
This setup also gives a lot better airflow than original ...plus is heaps easier to service. Downside is GU airboxes are not cheap second hand...and can be a bit hard to source.
HTH.
Cheers Keith
Nuthin is ever the same once I own it !!
Who is online
Users browsing this forum: No registered users and 42 guests