Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

36x12.5-15 Centerpedes, would you use a 15x10 or 15x8?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 67
Joined: Wed Jan 02, 2008 1:14 am
Location: S.E. Melbourne

36x12.5-15 Centerpedes, would you use a 15x10 or 15x8?

Post by CHUUBZ »

As the title says, getting some 36" centerpedes and not sure weather to put them on a 15x10 or a 15x8 with a reverse offset on a GQ.

Any input would be appreciated witch size rims works better with these tyres.

Cheers.
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

haven't tried them on 10s but had some on some 15x8's and they were great, had simex tubes also, ran around 5psi ok.
Only thing i found was that the rims turned a fraction in the tyres - not much or it would have buggered the tubes, but just enough to put the valve stems on a slight angle, could be wrong but i'd assume this would be more likely on 10 inch rims - unless beadlocked.
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Contact:
Contact B.D.R

Post by B.D.R »

G'day mate.

Put them on 8" rims, if you have them.

I run mine on 8s and never had a problem, a mate ran them on 10's and had a few issuse with the tyres comming off at lower pressuer :D
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

maciek :?: run them on 8s dude. less likely to get dirt in the bead of the rim as the tyre is the opposite of stretch haha could go some sweet offset 9 inch wheels if you want it to look good.
Top
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

i have ran mine on 8's and 10's tyres spreads out much further (wider) on 10's but you need bead locks if you run them on 10's..
gq coil cab with stuff
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

I run my 36x12.5x15 centipedes down to 11 psi on 8 inch rims tubeless. Never popped one off a bead yet and I do some pretty gnarli off roading.
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

Don't run them on 10's unless u like reseating lots of beads in the bush
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

crankycruiser wrote:Don't run them on 10's unless u like reseating lots of beads in the bush
X eleventy.

if you were to get 8's and then decide to beadlock them (the weld on type where your tyre sits essentially outside the actual rim) they are then pretty much a 9in wide rim so you get the best of both worlds. i found i struggled to fit in some ruts with my GQ and GU with the 15x10in -21 offset rims.
GU td42 ute with go fast bits and go futher bits
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Mine have worked well on 15x10 beadlocks. Never had to rebead the inners.

A beadlocked 8" to make a 9" rim would be ideal.

Stu at Enduro Offroad should be able to help you with a set.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest