Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aquaphobic 80 series cruiser

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

aquaphobic 80 series cruiser

Post by Middo »

hey iv got a query i told my mate i ask the outers oracle about. he has just bought an 80 series cruiser wagon. it passed its roadworthy no worries. everytime he drives it into water be it bonnet level or just enough to splash the car a little it starts to spludder and cough and sometimes it evens stops on him and wont start for a bit. we cant figure out wat the problem is cause theres no water in the air filter and we know that water isnt getting into the petrol tank cause weve checked it for holes and the fule pump hole is sealed realy well.
any ideas?



cheers. tim
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Dizzy cap and or leads getting wet?
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

yeh considered this but as i said it even does it in water that bairly splashes the car
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 30
Joined: Wed Sep 23, 2009 4:51 pm
Location: sunny coast

Post by ditchwitch »

that's really all it can betest with a hose and motor running
Top
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

i've got a mate with an 80 series gxl 4.5 on LPG his car does the same, if you get water anywhere near the front of it stops dead.... :?:
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Top
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Post by MrGrim »

could i make a simple sudjestion ive used to find a short i had ...



with the car running in the driveway bonnet up go around the front slowly with a squirty bottle set on stream not spray and slowly work around it until you find the area that causes it to stop or play up ...

i did this after months of problems with an ingition short endedd up being a bare wire in the loom that just happened to be the coil tacho wire when shorted it killed the engine

using a hose is to random with the squrty bottle at least it a small area at a time
Last edited by MrGrim on Tue Mar 16, 2010 11:19 am, edited 1 time in total.
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

yeh cheers mr grim. will try this out next time i c him
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

problem solved. mate took his car to a family friend who is a mechanic and it had the wrong size leads on it so water was gettin in real easy.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

at the rear of the dizzy there is a hole... the water runs down the back of the dizzy and straight into the hole and then into the dizzy.... they dont like it.. also there is a hole at the bottom that needs sealing up...

I put a breather on mine and it made it shitloads better... and the beauty of it is, if it does get water in its giny, then u can spray CRC down the breather and it clears up straight away.

this is the breather hose i put in mine.. bit hard to see but u get the idea
Image
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

cheers for goin to the trouble of taking a picture and everything mate. ill have a look at my mates cruiser wen he gets back from the mines on the weekend. cheers
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 84 guests