Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear diff under the leaf springs?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3
Joined: Fri Mar 19, 2010 11:54 pm
Location: Ireland

rear diff under the leaf springs?

Post by nlbyrne »

Hello, I have a 88' shorty Pajero I'm thinking of moving the rear diff under the leaf springs?
Whats your thoughts?
My thinking would be that the drive shaft would be to short maybe?
Has anyone ever seen or better still done this to their Pajero.
All thoughts welcome.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

I'm not sure about pajero's mate, but it's been done plenty with various models of landcruiser. Theres is alot more to worry about than just tailshaft lengths, in general. You also have steering geometry and linkage issues, take into account the added height and centre of gravity changes as well. try the search function at the top of the page, there will be a bucket load of info in there for you to try and get a handle on what might be required for your paj.
cheers
rob
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

is the front of an '88 pajero leaf spring or IFS?
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

so what will do to the front to match the 4" lift the back would suddenly have from doing a SPOA?
Ransom note = demand + collage
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

sprungupcruiser wrote:is the front of an '88 pajero leaf spring or IFS?
Werent they all IFS ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

Yeah i wasn't sure but i had a feeling they were, thats why i asked. He might have some issues with that i'd say.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

I think this guy knows what he's talking about, check his location.

His country invented the inflatable dart board, submarine screen door, solar powered torch and the waterproof towel.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Please keep your posts with the same questions to one area of the forum .. either put it in the Mitsui area or General tech .. not both.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests