Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tough Tracks 2010 - Round 1
Moderator: evanstaniland
TOugh Tracks Rd 1
We will be holding a ANZAC Day service out of respect on the sunday and yes Monday is a Holiday
See you all there it will be a graet weekend
The Treasurer
PS Get your Mobile numbers to the club so we can put you on our new sms service
See you all there it will be a graet weekend
The Treasurer
PS Get your Mobile numbers to the club so we can put you on our new sms service
What I got is 40inch sticky's. Thanks for the Confirmation Peter! See you there!bowtie landie wrote:Ben, if you go to 40cm tyres your diffs will be draging on the ground. I reckon you stick with what you got.WICKED wrote:Can we run 40's yet?
Pete
Glad to see the club moving with the times!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Mate, strap the sticky's to the sides - like a bumper car. Is Scotty going to navy for you? - you're going to need them.WICKED wrote:What I got is 40inch sticky's. Thanks for the Confirmation Peter! See you there!bowtie landie wrote:Ben, if you go to 40cm tyres your diffs will be draging on the ground. I reckon you stick with what you got.WICKED wrote:Can we run 40's yet?
Pete
Glad to see the club moving with the times!
If you REALLY DO want to run 40s we can put it to the club for a vote - there are probably a few guys that want to go up a tyre size. If you want to get some names together to show who's interested then we have no problem discussing it at a committee meeting & puting it to the vote.
Pete
40 inch tyres dudeRicko wrote:I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?WICKED wrote:Can we run 40's yet?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
have a look in here dudeRicko wrote:WICKED wrote:40 inch tyres dudeRicko wrote:I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?WICKED wrote:Can we run 40's yet?
Hope you make it out there mate.
http://www.outerlimits4x4.com/ftopic655-270.php
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Dude had a farily big roll over...Ricko wrote:Sounds like you lads had a good weekend! Can't see any panel damage that couldn't be buffed out. Any major mechanical issues??? Otherwise see you in a few weeks hey? You could always be a spectator...
Bent a front shaft but that was an easy fix.
Get 40's in and yes.....
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
just cruizin' wrote:with the addition of mod class I can't see you challenge can't step up the anty a bit. Tracks are getting harder and harder each round so why not.
My thoughts exactly
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
How many registered cars are there in seq running 40" tyres that would enter? And most prob have a lot of other mods like cutting brakes, rear disconnect, full hydro steering, rear steer, portals and no rego. I think for a 40" class your going to have to do more than just up the tyre size to make it worth while.
I think if you could get a class that suits the above mods you would get the support.
I think if you could get a class that suits the above mods you would get the support.
Well now that there is the 3rd class of 35's, dual lockers, etc why have a class 38.5 class? Why not step it up too take 40's, cutting brakes, Half door's, maybe rear disconnect. (I disagree with portals but Ruff, they are a massive thing to buy, fit and get working. By 40's, cut the gaurds, drive it)
There is an Entry Level (trophy), Medium Level (Mod i think it's called) and just above Mod (Challange)
All I can see different between Mod and Challange is lift and tyre size.
I REALLY REALLY Don't want to go back to 37's and full door's!!
If you are will too/would like to see a change in the above rule's please PM or email or call me. I will be calling Peter Kitchen, Alan, and other numbers I have or can get hold off to make this happen!
Is the next club meeting on the 7th??
There is an Entry Level (trophy), Medium Level (Mod i think it's called) and just above Mod (Challange)
All I can see different between Mod and Challange is lift and tyre size.
I REALLY REALLY Don't want to go back to 37's and full door's!!
If you are will too/would like to see a change in the above rule's please PM or email or call me. I will be calling Peter Kitchen, Alan, and other numbers I have or can get hold off to make this happen!
Is the next club meeting on the 7th??
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
I have just called Peter Kitchen and have had a quick chat about it all.
I will be asking the club too look at 40's, half doors and cutting brakes as a starting point. We can look at rear disconnect after that Aaron
Please PM, Email, attended the next club meeting or even post your name/support here if you would like too.
Thank all
Ben
I will be asking the club too look at 40's, half doors and cutting brakes as a starting point. We can look at rear disconnect after that Aaron
Please PM, Email, attended the next club meeting or even post your name/support here if you would like too.
Thank all
Ben
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: rules
I hope your still coming to watch huub.huub wrote:not competing this year but would make sense to up challenge a bit
Cheer us little zooks on
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Go the mighty Zook
The only motor sport we spend money on to go slower.
Re: rules
ill hope to be there ill cheer you onBruceh wrote:I hope your still coming to watch huub.huub wrote:not competing this year but would make sense to up challenge a bit
Cheer us little zooks on
http://www.turboshop.com.au/
Austyre Ashmore
Austyre Ashmore
Ok after many calls today there is a few things too look at.
WE NEED Votes, Name's, Number's of any and all Club and NON Club Members that would support the rule change. I will also try looking into insurance as I am told that, that is the biggest issue.
I will be writting a letter and need all the above info
Who support's the change -
Myself
WE NEED Votes, Name's, Number's of any and all Club and NON Club Members that would support the rule change. I will also try looking into insurance as I am told that, that is the biggest issue.
I will be writting a letter and need all the above info
Who support's the change -
Myself
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Who is online
Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot] and 1 guest