Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LS1 gmv info

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 24
Joined: Wed Nov 27, 2002 6:19 pm
Location: Melbourne Aust

LS1 gmv info

Post by patrolnut »

Just tring to find the heaviest ls1 and 4l60 car made by holden and what the gmv is for the engineer. having issues trying to find this info.

any help would be appreciated

thanks
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: LS1 gmv info

Post by bogged »

have a look over at http://www.ls1.com.au/
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: LS1 gmv info

Post by crankycruiser »

patrolnut wrote:Just tring to find the heaviest ls1 and 4l60 car made by holden and what the gmv is for the engineer. having issues trying to find this info.

any help would be appreciated

thanks
be the calais i rekon...

the cross 8 utes and wagons ran the 5.7 but ran the 4L80e, that would be the heaviest car they make.
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Re: LS1 gmv info

Post by stuee »

crankycruiser wrote:the cross 8 utes and wagons ran the 5.7 but ran the 4L80e, that would be the heaviest car they make.
I don't believe this to be correct. I was of the understanding that no Commodore based vehicles came with the 4l80e. Possibly the slightly beefier 4l65e, but I'm happy to be proven wrong because chances are it would be a cheap source of otherwise expensive transmissions.
-Scott- wrote:Isn't it a bit early in the day to be pissed? :finger:
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

I think that the chev silverado 1500 ran a 4l60e but not 100%. i know the 2500 went to a 4l80.

Also pretty sure the cross8 was still a 4l60. What about the holden 1 tonner?

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 74
Joined: Sun Jun 19, 2005 3:43 pm
Location: Healesville

Post by zackde »

redbook gives GVM for vehicles be your best bet.
Now driving FZJ-80 GXL 6.2 LS3 powered.
Top
Posts: 24
Joined: Wed Nov 27, 2002 6:19 pm
Location: Melbourne Aust

Post by patrolnut »

thanks guys

red book sorted it out the engineer wants the GMV of the car the engines coming out of to be not less than 120kg than the car its going into.

I had the figure for the vy one tonner as 2826 which was correct but the figure i had for the 2.8 gu was at 2960 but the redbook had it back down 2900, so i should be right!
Top
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

yer i remember looking into an LS1, its half the weight of my 4.2 1HZ, how goods that lol.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 92 guests