Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Supercharged V6 commy

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 593
Joined: Mon Aug 31, 2009 9:02 am
Location: gracemere, no where near mt morgan

Supercharged V6 commy

Post by Shieldsy »

What does everyone think of these motors?? iv heard that because they have a alloy head theyl tend to crack alot easier than the cast iron head...has any1 had any troubles with the v6/supercharged motors??
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.

ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Post by turbmav »

If ya thinking of a conversion into a 4wd I wouldn't bother. My old man had VT S pack and wasn't that much more than standard but with crap economy.
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

The supercharged V6 isn't an alloy head, its cast iron. The design differs from the early VN-VR in that is a lighter weight casting and the induction heardening of the valve seats is not as good as they do not last at long as the earier heads, especially on LPG. They have a modified port design as the ports are evenly spaced, intake/exhaust/intake ad so on unlike the earier design which had siamesed ports. Not to bad in a Hilux as they are shorter that a V8 and the Hilux drive train isn't as strong.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 593
Joined: Mon Aug 31, 2009 9:02 am
Location: gracemere, no where near mt morgan

Post by Shieldsy »

thats interesting. im thinkin bout replacing my 3f with one and wasnt sure cuz thats what id heard.
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.

ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Posts: 237
Joined: Sun Dec 06, 2009 2:03 pm
Location: QLD

Post by nerida67 »

u would only think of putting one in if room is limited
if rooms not limited the injected V8 is the go
Posts: 466
Joined: Sun Oct 11, 2009 5:53 pm
Location: Pakenham, Victoria

Post by HUSSLN »

they are built well from factory, knife edge forged crank. bottom end will see 350hp easy. Heads im not sure, i had one in a vs and both heads went on me but i think the old owner screwed me a bit. But with 11psi pully and roller rockers and a custom tune i saw 200rwkw with decent fuel economy. But the engines arent cheap, just buying one will eat up half ya budget of getting a lexus v8 which is a far better option. Having owned a hilux with a v6 in it i wouldnt have one again, would rather do a 3rz conversion.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests