gday guys, a friend of mine had a suggestion the other day that i was wondering somebody could shed light on, he thinks that a set of shocks out of a cruiser to suit a 6" lift have a longer extended length than equivelent shocks to suit a nissan, therefore if i use a pin to eye adaptor to make em bolt up id have a longer extended length shock?
i havent really looked into it at all but there is a wealth of knowedge on this forum and im sure somebody would have tried this before if its possible.
any help is appreciated
Gaz
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cruiser shocks into a gu
Many many moons ago. I think there was talk of putting STD length 80series shocks onto a GQ. As they where long enough for a 2"lift on a GQ.
So that would mean 6" lift 80series shocks would be good for 8" lift in a GQ.
Maybe disconnect your current shocks and flex it up and see how much wheel travel you can actually use.
So that would mean 6" lift 80series shocks would be good for 8" lift in a GQ.
Maybe disconnect your current shocks and flex it up and see how much wheel travel you can actually use.
THOUGHT FOR THE DAY....
Who is online
Users browsing this forum: No registered users and 0 guests