Hi i have a 5LE motor with a M24 thread on the oil filter (same as the 1kzte motor), i want to run a oil cooler but the standard sandwich plates only go up to 22mm...
Any one know if there is one around in this size, or if there is another option to run a oil cooler.
Also i am running a turbo, so the port on the block i was going to use is already taken up.
Cheers
Brad
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
M24 sandwich plate, oil filter plate
Moderators: toaddog, TWISTY, V8Patrol, Moderators
M24 sandwich plate, oil filter plate
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Guess no one has had this problem, might buy a sandwich plate and get out the old cad programme, design one and get a local CNC place to make it for me....
Brad
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 1 guest